1982/09/06 Caterpillar


New Instruction Card Available For 6V87 Valve Stem Gauge{0653}

Usage:


A new instruction card is available for the 6V87 Valve Stem Gauge. The new card is easier to understand and faster to use. Information for inlet and exhause valves is shown separately. Also, information for later valves has been added. The new instruction card, Form SEHS7758-01, is the same size as the former card, and can be used as a direct replacement.

Caterpillar Information System:

1982/09/06 Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06 Improved Inlet And Exhaust Valves{1105}
1982/09/06 New Brass Bonnet, Bonnet Assembly Used In Heat Exchanger{1379}
1982/09/06 Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/08/30 Make Sure Generator Leads Do Not Move Against Frame{4459}
1982/08/30 Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30 Change Made To Installation Procedure For 3N5620 Service Disconnect Spacer Group{0374,1000}
1982/08/30 New Rear Support For Oil Cooler Is Thicker, Has Cast-In Spacers{1378}
1982/08/23 New Time Delay Conversion Groups Available{7400}
1982/08/23 Service Life Of Slip Rings Can Be Extended{4464}
1982/08/23 New Lines Group For Water Cooled Turbocharger{1052,1307,1380}
1982/08/23 Repair Kit For The 5P9700 Hose Cutter Is Available{0623,1380}
1982/09/13 New Bearing Used In Air Starting Motor {1451}
1982/09/13 New Seal Rings Used In BrakeSavers {1155}
1982/09/13 Two Oil Change Kits Have Oil Filters, Cooling System Conditioner {1318,1350}
1982/09/13 New Water Pumps Use New Seal And Impeller {1361}
1982/09/13 Caterpillar-Built Industrial Engines Available In New Machines {0371,1000}
1982/09/13 New Rocker Arm Assemblies Used {1102}
1982/09/13 Seat Belt Hook Fasteners {7327}
1982/09/13 Improved Idler Pulley Assemblies For 3208 Engines {1156,1358,4306}
1982/09/20 FT1421 Spring Installer Makes Installation of Seat Suspension Springs Easier{7324,0622}
1982/09/20 New Meter Can Be Used To Check Wire Feed Rates During Weld Operations Of Undercarriage Components{0653}
1982/09/20 Improved Lubrication System{3311}
1982/09/20 New Recommendations For Track Roller Wear Before Rebuilding{4180,0662}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.