E368 High Intake Manifold Air Temperature
产生此代码的情况:
电子控制模块（ECM）可检测以下状况：
E368-1
- 进气歧管空气温度至少为 75 °C (167 °F) 持续超过四秒钟。
- 发动机至少已运转三秒钟。
系统响应:
E368-1
ECM 将触发一个快照。 一旦进气歧管空气温度降到低于 73 °C (163 °F) 持续四秒，就会记录事件代码。
E368-1
无
测试步骤 1. 检差进排气系统
参考请参阅测试与调整, "进排气系统"。
结果:
- 正常 - 停止
Caterpillar Information System:
C18 Marine Generator Set Engines CID 1929 FMI 04 Fuel Return Temperature Sensor voltage low/short to ground
C18 Marine Generator Set Engines CID 1929 FMI 03 Fuel Return Temperature Sensor voltage high/short to +batt
2004/03/01 A New Spring for the Oil Filter Bypass Valve and for the Oil Cooler Bypass Valve is Now in Production {1306, 1314, 1318, 1378}
2004/01/01 A New Spring for the Oil Filter Bypass Valve and for the Oil Cooler Bypass Valve is Now in Production {1306, 1314, 1318, 1378}
G3500 Engines Control Module Self Test
C18 Marine Auxiliary Engines Diagnostic Codes
C18 Marine Auxiliary Engines Event Codes
3126B Industrial Engine Electronic Control Module - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Assemble
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Install
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Remove
C18 Marine Auxiliary Engines Sensors and Electrical Connectors
C13, C15, and C18 Generator Set Engines E009 High Altitude Derate
Troubleshooting Tips Will Help Maintain Steady Engine RPM{1264, 1280} Troubleshooting Tips Will Help Maintain Steady Engine RPM{1264, 1280}
G3500 Engines Replacing the EIS Control Module
G3500 Engines Engine Speed/Timing Sensor - Calibrate
G3500 Engines Electrical Power Supply
C13, C15, and C18 Generator Set Engines Can Not Reach Top Engine RPM
2003/12/01 New Design of the Injector Provides Improved Durability {1290, 1714}
G3500 Engines Engine Speed Sensor
G3500 Engines Engine Speed/Timing Sensor
G3500 Engines Engine Speed Switch
G3500 Engines Fuel Actuator