Auxiliary Water Pump - Remove
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect hose (2) and hose (4) from auxiliary water pump (3).
- Remove bolts (1).
- Remove auxiliary water pump (3) from the front housing.
- Remove the integral seal from the face of the auxiliary water pump.
Show/hide table
| |
| Illustration 1 | g01032968 |
Caterpillar Information System:
2003/11/01 Improved Exhaust Seal for the Exhaust Manifold {1059}
2004/01/01 An Updated Version of Troubleshooting Guide, SENR9698 is Now Available {1105, 1400}
C32 Marine Engine Fuel System
C32 Marine Engine Electronic Control System Components
C9 Marine Engines and C9 Marine Generator Sets Camshaft Gear - Remove and Install
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Load Cell - Remove and Install
Installation Guide for Particulate Trap Exhaust Filters{1091} Installation Guide for Particulate Trap Exhaust Filters{1091}
2003/12/01 New Gaskets in the Water Lines Groups {1380}
G3500 Engines Too Much Vibration
G3500 Engines Short Spark Plug Life
G3500 Engines Poor Fuel Consumption
G3500 Engines Noise Coming from Cylinder
C7 PETROLEUM Petroleum Engine Auxiliary Water Pump - Assemble
G3500 Engines Self-Diagnostics
C9.3 Marine Engine Auxiliary Water Pump - Install
C7 PETROLEUM Petroleum Engine Auxiliary Water Pump - Disassemble
C32 Marine Engine Heat Exchanger
G3500 Engines Location of Components
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
C27 and C32 Generator Set Engines Electronic Unit Injector Rocker Arm
Installation of the 5P-4889 O-Ring Seal for the Fuel Transfer Pump{1256} Installation of the 5P-4889 O-Ring Seal for the Fuel Transfer Pump{1256}
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Travel Motor Guard - Remove and Install
C32 Marine Engine Vibration Damper and Pulley
C18 Generator set and C18 Marine Engines Rocker Arm and Shaft - Install