Wastegate Solenoid
Show/hide table
 | |
| Illustration 1 | g01062267 |
Note: Apply 5P-3975 Rubber Lubricant to the valve seals on the solenoid immediately prior to assembly.
(1) Tighten the solenoid body into the manifold to the following torque. ... 50 ± 5 N·m (37 ± 4 lb ft)
(2) Tighten the nut to the following torque. ... 13.0 ± 1.5 N·m (9.60 ± 1.10 lb ft)
Caterpillar Information System:
Cat® Digital Voltage Regulator Troubleshooting
C11 and C13 Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C9 Urban Transit Bus Engine Electric Starting Motor
Cat Gas Engine Lubricant, Fuel, and Coolant Recommendations Hydrogen Sulfide Effects on Engine Maintenance Costs
C15 On-highway Engine Precooler
G3406 Engines Electric Starting Motor
3408C and 3412C Marine Engines Engine Design
3456 Generator Sets Bearing Temperature - Measure/Record
C11 and C13 Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
3456 Generator Sets Insulation - Test
G3500 Generator Sets Ignition System Timing - Check/Adjust
Installation Instructions for the 240-0716 Tube Kit for the High Pressure Oil Line for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714} Installation Instructions for the 240-0716 Tube Kit for the High Pressure Oil Line for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
C11 and C13 On-Highway Engines Air Lines
G3406 Engines Piston and Rings
3126B Engine for Caterpillar Built Machines Gear Group (Front)
C11 and C13 Engines Engine Oil Cooler - Install
C3.3 Industrial Engine Connecting Rod Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove
C11 and C13 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Install
C11 and C13 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C3.3 Industrial Engine Connecting Rod Bearings - Remove
3456 Generator Sets Reference Numbers
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
Cat® Digital Voltage Regulator No Voltage - Troubleshoot