Connecting Rod Bearings - Remove
拆卸步骤
开始:
- 拆下发动机机油泵。 参考拆解与组装, "发动机机油泵 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
注: 每一对连杆盖的拆卸和安装均需同时进行。 脱开断面分裂式连杆时会造成损坏。
- 为了拆下连杆盖,顺时针转动曲轴,直至一对活塞处在下止点位置。
注: 确保连杆和连杆盖相对气缸正确标记。 如果要标记连杆组件,不要在连杆组件上冲孔或压印,因为这可能会造成损坏。
- 从连杆盖上拆下梅花螺钉,再与轴瓦一起拆下一对连杆盖。 将一对连杆推入气缸中。 不要使连杆接触活塞冷却喷嘴。
- 要靠近一对连杆,需小心地转动曲轴。
- 从连杆和连杆盖上拆下轴瓦。
- 先将所有新轴瓦装入连杆和连杆盖中,再继续进行下一对连杆的工作。 请参阅解体和组装手册, "连杆轴承 - 安装"。
Caterpillar Information System:
C11 and C13 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Install
C11 and C13 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove
C3.3 Industrial Engine Connecting Rod Bearings - Install
C11 and C13 Engines Engine Oil Cooler - Install
3126B Engine for Caterpillar Built Machines Gear Group (Front)
G3406 Engines Piston and Rings
C11 and C13 On-Highway Engines Air Lines
C9 Urban Transit Bus Engine Wastegate Solenoid
Cat® Digital Voltage Regulator Troubleshooting
C11 and C13 Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C9 Urban Transit Bus Engine Electric Starting Motor
3456 Generator Sets Reference Numbers
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
Cat® Digital Voltage Regulator No Voltage - Troubleshoot
C13, C15, and C18 Tier 4 Final Engines Camshaft
2003/09/01 A New Bracket Reduces Vibration on the Air Silencer {1468}
Application Guideline for the Bellows{1061} Application Guideline for the Bellows{1061}
3406C Engines for Caterpillar Built Machines Engine Oil Filter Base
Cat® Digital Voltage Regulator Low Voltage - Troubleshoot
Cat® Digital Voltage Regulator High Voltage - Troubleshoot
3408C, 3412C and 3412D High Performance Marine Engines Crankshaft
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C11, C13, and C15 On-highway Engines Cold Start Strategy