Engine Oil Cooler - Install
安装步骤
- 向发动机前方滑动发动机机油冷却器 (3) 。 将发动机机油冷却器 (3) 放置在缸体上。
Show/hide table
 | |
| 图 1 | g01013646 |
- 将螺栓 (9) 安装机油滤清器座上。
- 连接线束组件 (7) 。
- 连接软管 (8) 和软管 (10) 。
- 安装弯管 (6) 。
Show/hide table
 | |
| 图 2 | g01013590 |
- 安装软管组件 (2) 。
- 连接管组件 (1) 和管组件 (5) 。
End By: 安装涡轮增压器。 请参考 解体及组装, "涡轮增压器 - 安装"。
Caterpillar Information System:
3126B Engine for Caterpillar Built Machines Gear Group (Front)
G3406 Engines Piston and Rings
C11 and C13 On-Highway Engines Air Lines
C9 Urban Transit Bus Engine Wastegate Solenoid
Cat® Digital Voltage Regulator Troubleshooting
C11 and C13 Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C9 Urban Transit Bus Engine Electric Starting Motor
Cat Gas Engine Lubricant, Fuel, and Coolant Recommendations Hydrogen Sulfide Effects on Engine Maintenance Costs
C15 On-highway Engine Precooler
G3406 Engines Electric Starting Motor
3408C and 3412C Marine Engines Engine Design
3456 Generator Sets Bearing Temperature - Measure/Record
C3.3 Industrial Engine Connecting Rod Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove
C11 and C13 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Install
C11 and C13 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C3.3 Industrial Engine Connecting Rod Bearings - Remove
3456 Generator Sets Reference Numbers
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
Cat® Digital Voltage Regulator No Voltage - Troubleshoot
C13, C15, and C18 Tier 4 Final Engines Camshaft
2003/09/01 A New Bracket Reduces Vibration on the Air Silencer {1468}
Application Guideline for the Bellows{1061} Application Guideline for the Bellows{1061}
3406C Engines for Caterpillar Built Machines Engine Oil Filter Base