Fuel Injection Pump
Note: The engine is equipped with an axial piston distributor injection pump that is mechanically governed. Parts that are inside of the fuel injection pump are only serviceable by an authorized dealer.
Show/hide table
Illustration 1 | g00993641 |
(1) Tighten the overflow valve for the fuel injection pump to the following torque. ... 22 to 31 N·m (16 to 23 lb ft)
(2) Screw for adjusting the full load setting
(3) Tighten the nut for the fuel injection pump gear to the following torque.
- Naturally aspirated engines ... 59 to 69 N·m (43 to 51 lb ft)
- Turbocharged engines ... 83 to 98 N·m (62 to 72 lb ft)
(4) Fuel shutoff solenoid
(5) Bolt for attaching to the gear case cover
(6) Delivery valves for the fuel
Caterpillar Information System:
Installation Guide for Industrial Electronic Engine Displays CAT Data Link Circuit - Test
C-12 Marine Engines Fuel Temperature Sensor - Remove and Install
C-10, C-12 and C-15 On-highway Engines Cooling Fan Circuit and A/C High Pressure Switch Circuit - Test
C1.5 and C2.2 Generator Generator - Dry
G3304 and G3306 Engines Water Temperature Regulator - Install
C1.5 and C2.2 Generator Insulation - Test
Installation Guide for Industrial Electronic Engine Displays Engine Monitoring System - Test
Installation Guide for Industrial Electronic Engine Displays Analog Power Display - Test
2003/04/14 There is New Information on the Oil Grade Plug {1000, 1348}
Installation Guide for Industrial Electronic Engine Displays Analog Power Display
G3304 and G3306 Engines Water Temperature Regulator - Remove
Installation Guide for Industrial Electronic Engine Displays Engine Monitoring System
G3304 and G3306 Engines Turbocharger - Disassemble
G3520C and G3520E Generator Set Engines Auxiliary Water Pump - Remove
G3520C and G3520E Generator Set Engines Auxiliary Water Pump - Install
C1.5 and C2.2 Generator Troubleshooting
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Transfer Pump
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Injection Nozzles
2003/06/09 New Software Released for Machine Security System (MSS) {7620}
G3520C and G3520E Generator Set Engines Aftercooler - Remove
G3520C and G3520E Generator Set Engines Aftercooler - Install
2012/10/01 Procedure for Disassembly and Assembly of the Pressure Relief Valve in Certain C32, G3500, 3500. 3600, and C280 Engines {5117}
3054E Industrial Engine Alternator - Install
Installation Guide for Industrial Electronic Engine Displays Messenger - Test