Water Temperature Regulator - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Place water temperature regulator (1) into position in the cylinder head.
Show/hide table
Illustration 2 g00992850 - Install a new gasket and pipe (2) over the water temperature regulator.
- Install clip (3) and bolts that hold pipe (2) in place.
- Fill the cooling system with coolant to the correct level.
Show/hide table
Illustration 1 | g00992848 |
Caterpillar Information System:
C1.5 and C2.2 Generator Insulation - Test
Installation Guide for Industrial Electronic Engine Displays Engine Monitoring System - Test
Installation Guide for Industrial Electronic Engine Displays Analog Power Display - Test
2003/04/14 There is New Information on the Oil Grade Plug {1000, 1348}
Installation Guide for Industrial Electronic Engine Displays Analog Power Display
G3304 and G3306 Engines Water Temperature Regulator - Remove
Installation Guide for Industrial Electronic Engine Displays Engine Monitoring System
3500B Engines Engine Oil Lines - Front Mounted Engine Oil Filter
G3304 and G3306 Engines Water Pump - Assemble
3406E, C-10 and C-12 On-highway Engines Replacing the ECM
Installation Guide for Industrial Electronic Engine Displays Wiring - J1939 Data Link
Cold Weather Recommendations for On-Highway Diesel Truck Engines Cold Weather Recommendation Charts
C1.5 and C2.2 Generator Generator - Dry
C-10, C-12 and C-15 On-highway Engines Cooling Fan Circuit and A/C High Pressure Switch Circuit - Test
C-12 Marine Engines Fuel Temperature Sensor - Remove and Install
Installation Guide for Industrial Electronic Engine Displays CAT Data Link Circuit - Test
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Injection Pump
G3304 and G3306 Engines Turbocharger - Disassemble
G3520C and G3520E Generator Set Engines Auxiliary Water Pump - Remove
G3520C and G3520E Generator Set Engines Auxiliary Water Pump - Install
C1.5 and C2.2 Generator Troubleshooting
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Transfer Pump
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Injection Nozzles
2003/06/09 New Software Released for Machine Security System (MSS) {7620}