The 3044C engine is an in-line four cylinder engine. The engines are controlled by a mechanically governed fuel injection pump.
The engines have been designed for many different applications. These engines are available in two different types of aspiration:
- Naturally aspirated
- Turbocharged
Lifting the Engine
| NOTICE |
|---|
Failure to follow recommended procedures for handling or transporting engines can lead to engine damage. To avoid possible engine damage, use the following procedure. |
When you are lifting or moving the engine, use the following procedures in order to prevent engine damage.
- Do not tilt the engine to an extreme angle unless the lubricating oil is first drained from the oil pan.
- Do not turn the engine onto a side or an end surface unless the lubricating oil is first drained from the oil pan.
- If the oil is not drained prior to tilting the engine or turning the engine onto a side or an end surface, the lubricating oil from the oil pan can flow into the intake manifold and the cylinder bores. This situation could cause a hydraulic lock in the engine. Hydraulic lock can severely damage the engine.
- The engine oil should be refilled to the correct level before the engine is started.
Naturally Aspirated Engine Views
 | |
| Illustration 1 | g01280574 |
Left side view of the naturally aspirated engine (1) Fuel injection nozzle (2) Bus bar with glow plugs (3) Oil fill cap (top) (4) Engine lifting bracket (5) Inlet manifold (6) Engine oil level gauge (7) Coolant drain plug (8) Flywheel housing (9) Flywheel (10) Engine oil filter (11) Engine oil relief valve (12) Oil drain plug (13) Engine oil pan (14) Engine oil pressure switch (15) Fuel injection pump (16) Fan (17) Oil fill cap (front) (18) Water pump (19) Engine oil cooler | |
 | |
| Illustration 2 | g01280599 |
Right side view of the naturally aspirated engine (20) Valve mechanism cover (21) Water temperature regulator housing (22) Engine lifting bracket (23) Alternator (24) V-Belt (25) Crankshaft pulley (26) Electric starting motor (27) Exhaust manifold | |
Turbocharged Engine Views
 | |
| Illustration 3 | g01280630 |
Left side view of the turbocharged engine (1) Fuel injection nozzle (2) Bus bar with glow plugs (3) Inlet manifold (4) Engine lifting bracket (5) Closed crankcase breather (6) Flywheel housing (7) Flywheel (8) Engine oil level gauge (9) Coolant drain (10) Engine oil filter (11) Engine oil relief valve (12) Oil drain plug (13) Engine oil pan (14) Engine oil pressure switch (15) Fuel injection pump (16) Oil fill cap (front) (17) Water pump (18) Engine oil cooler | |
 | |
| Illustration 4 | g01280831 |
Right side view of the turbocharged engine (19) Valve mechanism cover (20) Engine lifting bracket (21) Coolant temperature switch (22) Water temperature regulator housing (23) Alternator (24) V-Belt (25) Crankshaft pulley (26) Electric starting motor (27) Oil supply line for turbocharger (28) Oil drain line for turbocharger (29) Exhaust manifold (30) Turbocharger (31) Oil fill cap (top) | |