Instrument Panel - Inspect
Inspect the instrument panel for good condition. A self test is performed automatically whenever power is first applied to the instrument panel. Refer to this Operation and Maintenance Manual, "Instrument Panel"article for information on the self test. All of the warning lamps should illuminate. If a warning lamp does not illuminate, replace the bulb immediately.
Check the condition of all of the gauges. If a gauge is broken, repair the gauge or replace the gauge immediately.
Frequently monitor the gauges during normal operation.
Record the data in a log. Compare the new data to the data that was previously recorded. Comparing the new data to the recorded data will help to establish the trends of engine performance. A gauge reading that is abnormal may indicate a problem with operation or a problem with the gauge.
Caterpillar Information System:
3512B Marine Auxiliary Engines Crankcase Breather - Remove and Install
3512B Marine Auxiliary Engine Engine Oil and Filter - Change
C9 Urban Transit Bus Engine General Information
G3520C and G3520E Generator Set Engines Exhaust Manifold
2002/10/01 Connecting Rods with Dual Bearing Tab Slots are OK to Use {1218}
2002/10/21 New Electronic Control Modules Used on Machine Engines {1901}
3512B Marine Auxiliary Engine Engine Oil Level - Check
3512B Marine Auxiliary Engine Electronic Control System Operation
C7 and C9 On-Highway Engines 0111-11 Very Low Coolant Level (62)
C7 and C9 On-Highway Engines 0111-04 Coolant Level voltage low (12)
C7 and C9 On-Highway Engines 0111-03 Coolant Level voltage high (12)
C9 On-Highway Engines Lubrication System
2002/10/14 New Tightening Procedure for the Base of the Valve Mechanism Cover {1107}
G3500 Engines Finding the Top Center Position for the No. 1 Piston
C7 and C9 On-Highway Engines 0231-14 Transmission Data Link Derate
3512B Marine Auxiliary Engine Configuration Parameters
Product Link 151/201 Electronic Control Module (ECM)
Product Link 151/201 System Components
3054E Industrial Engine Fuel System - Prime
Product Link 151/201 Spare Inputs
Product Link 151/201 General Information
3512B Marine Auxiliary Engine Monitoring System Parameters
3512B Marine Auxiliary Engine Electronic Unit Injector - Inspect/Adjust
2002/11/01 Connecting Rods with Dual Bearing Tab Slots are OK to Use {1218}