PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTRAL BLADE LASER SUPPORT THAT MAY INTERFERE WITH THE C FRAME FRONT TOWER ON CERTAIN D6N LGP TRACK-TYPE TRACTORS
Usage:
REBE2779-00
Show/hide table
| 25Oct2007 |
U-537
O-470
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTRAL BLADE LASER SUPPORT THAT MAY INTERFERE WITH THE C FRAME FRONT TOWER ON CERTAIN D6N LGP TRACK-TYPE TRACTORS |
|
| 5254 6060 | PS42536 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42536" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Oct2009 |
PROBLEM
Show/hide table
| The 307-3628 Central Laser Blade Bracket may interfere with the 104-7423 C Frame Front Tower on certain D6N LGP Track-Type Tractors that are equipped with a 235-5001 Laser Blade. The interference occures with the vertical plate of the laser support when the blade is fully angled and tilted. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| D6N LGP | DJY00258, 297, 382, 387, 391, 393-394, 397, 414, 416, 418-420, 426, 429, 432, 443-444, 446-448, 453, 456-457, 459, 463, 468, 473, 480-481, 484-485, 490, 496, 498, 500-502, 504, 512, 515, 517-518, 521, 527-528, 537, 541, 543, 546-548, 550, 558, 562, 565, 567, 574, 584, 597, 633-634, 643, 648, 658 |
PARTS NEEDED
Show/hide table
| No parts needed for this program |
ACTION REQUIRED
Show/hide table
| Grind the vertical gussets in order to avoid the interference. Refer to the attached Rework Procedure. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
Show/hide table
| NOTE: This is a 2.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Show/hide table
| Grind the 2 307-3627 Plates according to the following images. |
|
| Image1.1.1 |
|
| Image1.1.2 |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL SUCTION PIPE ON CERTAIN SMALL WHEEL LOADERS, VIBRATORY SOIL COMPACTORS, AND 3056 AND 3056E INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL SUCTION PIPE ON CERTAIN SMALL WHEEL LOADERS, VIBRATORY SOIL COMPACTORS, AND 3056 AND 3056E INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SCRAPER ENGINE MUFFLER ASSEMBLY MOUNTING HARDWARE ON CERTAIN 657G WHEEL TRACTOR SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SCRAPER ENGINE MUFFLER ASSEMBLY MOUNTING HARDWARE ON CERTAIN 657G WHEEL TRACTOR SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RIDE CONTROL ACCUMULATOR HOSE ON CERTAIN 966H AND 972H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE RIDE CONTROL ACCUMULATOR HOSE ON CERTAIN 966H AND 972H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LIFT CYLINDER HEAD ON CERTAIN 938G SERIES II WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE LIFT CYLINDER HEAD ON CERTAIN 938G SERIES II WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CUSHION HITCH DRAIN HOSES AND TUBES ON CERTAIN 631G AND 637G WHEEL TRACTOR-SCRAPERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CUSHION HITCH DRAIN HOSES AND TUBES ON CERTAIN 631G AND 637G WHEEL TRACTOR-SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE TRANSMISSION ON CERTAIN D8T TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REPAIRING THE TRANSMISSION ON CERTAIN D8T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 280-9604 TILT LEVER ON CERTAIN 972H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 280-9604 TILT LEVER ON CERTAIN 972H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND POSSIBLE REPAIR OR REPLACEMENT OF CERTAIN WIRING HARNESSES AND AIR CONDITIONING SWITCH ON CERTAIN 525C, 535C, AND 545C WHEEL-TYPE SKIDDERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND POSSIBLE REPAIR OR REPLACEMENT OF CERTAIN WIRING HARNESSES AND AIR CONDITIONING SWITCH ON CERTAIN 525C, 535C, AND 545C WHEEL-TYPE SKIDDERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE STEERING CLUTCH AND BRAKE GROUP ON CERTAIN D10T TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE STEERING CLUTCH AND BRAKE GROUP ON CERTAIN D10T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL LINES AND/OR HOSES AND THE FUEL MANIFOLD FOR CERTAIN C27 ENGINE THAT ARE ON D10T TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL LINES AND/OR HOSES AND THE FUEL MANIFOLD FOR CERTAIN C27 ENGINE THAT ARE ON D10T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ARM ASSEMBLY CENTER CASTING ON CERTAIN 963C TRACK LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE ARM ASSEMBLY CENTER CASTING ON CERTAIN 963C TRACK LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SPACER TO PREVENT PUSH ARM PIN INTERFERENCE WITH THE TRACK ON CERTAIN D6G II TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR INSTALLING A SPACER TO PREVENT PUSH ARM PIN INTERFERENCE WITH THE TRACK ON CERTAIN D6G II TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT DIFFERNTIAL ON CERTAIN 906 AND 908 COMPACT WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT DIFFERNTIAL ON CERTAIN 906 AND 908 COMPACT WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND/OR REPLACING THE 8 118-9573 BOLTS FOR THE BEARING RETAINER ON CERTAIN D6N SERIES III XL AND D6N SERIES III LGP TRACK-TYPE TRACTORS THAT ARE EQUIPPED WITH A VPAT DOZER PRODUCT SUPPORT PROGRAM FOR INSPECTING AND/OR REPLACING THE 8 118-9573 BOLTS FOR THE BEARING RETAINER ON CERTAIN D6N SERIES III XL AND D6N SERIES III LGP TRACK-TYPE TRACTORS THAT ARE EQUIPPED WITH A VPAT DOZER
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC SLAVE ELECTRONIC CONTROL MODULE (ECM) WHICH MAY FAIL ON CERTAIN D6K XL, D6K LPG TRACK-TYPE TRACTORS, 953D, AND 963D TRACK-TYPE LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC SLAVE ELECTRONIC CONTROL MODULE (ECM) WHICH MAY FAIL ON CERTAIN D6K XL, D6K LPG TRACK-TYPE TRACTORS, 953D, AND 963D TRACK-TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CARRIER BEARINGS ON CERTAIN 966H AND 972H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE CARRIER BEARINGS ON CERTAIN 966H AND 972H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LIFT CYLINDERS HOSES AND TUBES ON CERTAIN 966H AND 972H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE LIFT CYLINDERS HOSES AND TUBES ON CERTAIN 966H AND 972H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING LOADER LINKAGE CARTRIDGE RETENTION SYSTEM ON CERTAIN 992G WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING LOADER LINKAGE CARTRIDGE RETENTION SYSTEM ON CERTAIN 992G WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REWORKING CERTAIN 992G TILT CYLINDERS AND 994F LIFT CYLINDERS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REWORKING CERTAIN 992G TILT CYLINDERS AND 994F LIFT CYLINDERS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING REAR CRANKSHAFT COUNTERWEIGHT BOLTS IN 3508B ENGINES USED IN 992G, 854G, AND 777D MACHINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING REAR CRANKSHAFT COUNTERWEIGHT BOLTS IN 3508B ENGINES USED IN 992G, 854G, AND 777D MACHINES
PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 9W-5828 TRACK SHOES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 9W-5828 TRACK SHOES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING 3E-5239 RELAY ON CERTAIN 924G, 928G, AND 930G WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING 3E-5239 RELAY ON CERTAIN 924G, 928G, AND 930G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT HOOD SUPPORT ON 631G AND 637G TIER III WHEEL TRACTOR-SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT HOOD SUPPORT ON 631G AND 637G TIER III WHEEL TRACTOR-SCRAPERS