C-10
Illustration 1 | g00466006 |
(1) Torque for thrust pin ... 28 ± 7 N·m (21 ± 5 lb ft)
(2) Diameter of camshaft bearing journal ... 74.85 ± 0.025 mm (2.9468 ± 0.0010 inch)
The lobe on the camshaft for the injector has the most lift when the cam is at zero degrees of rotation. ... 11.9382 mm (0.47000 inch)
The lobe on the camshaft for the injector has zero lift through the given rotation. ... 72 degrees to 254 degrees
When the injector lobe has a lift height of 4.855 ± 0.038 mm (0.1911 ± 0.0015 inch), the camshaft should have an angle of rotation. ... 35 ± 0.25 degrees
C-12
Illustration 2 | g00466006 |
(1) Torque for thrust pin ... 28 ± 7 N·m (21 ± 5 lb ft)
(2) Diameter of camshaft bearing journal ... 74.85 ± 0.025 mm (2.9468 ± 0.0010 inch)
The lobe on the camshaft for the injector has the most lift when the cam is at zero degrees of rotation. ... 11.9382 mm (0.47000 inch)
The lobe on the camshaft for the injector has zero lift through the given rotation. ... 70 degrees to 254 degrees
When the injector lobe has a lift height of 5.365 ± 0.038 mm (0.2112 ± 0.0015 inch), the camshaft should have an angle of rotation. ... 30 ± 0.25 degrees