Wiring Table For 3T-3678 Motor Assembly In Electric Prelube Pumps {1469}
- Engines:
- 3606 (S/N: 8RB)
- 3608 (S/N: 6MC)
- 3612 (S/N: 9RC)
- 3616 (S/N: 1PD)
- G3606 (S/N: 3XF)
- G3608 (S/N: 4WF)
- G3612 (S/N: 1YG)
- G3616 (S/N: 4CG)
The 3T-3678 Motor Assembly is available as a service replacement for earlier electric motors in electric prelube pumps. These electric motors operate on single-phase electrical power. Wiring instructions may not have been included with the 3T-3678 Motor Assembly. Use the following wiring table in order to correctly install this motor as a service replacement.
Show/hide table
| Wiring Table | |||||
|---|---|---|---|---|---|
| Voltage | Rotation (1) | "Line A" (2) Wire Color |
"Line B" (2) Wire Color |
Connections (2) Wire Color |
Connections (2) Wire Color |
| 220 to 240 VAC | Standard | Gray | Black | Red White Orange |
Purple Brown |
| 220 to 240 VAC | Reverse | Gray | Black | Red White Brown |
Purple Orange |
| 110 to 120 | Standard | Gray White Orange |
Black | Red Purple Brown |
|
| 110 to 120 VAC | Reverse | Gray White Brown |
Black | Red Purple Orange |
|
Show/hide table
| ( 1 ) | The standard rotation is counterclockwise when the rotation is viewed from the fan end. |
| ( 2 ) | The source of the single-phase voltage is connected to "Line A" and "Line B". The wires that remain are connected together as this Wiring Table shows. |
Caterpillar Information System:
Product Link 151/201 Wiring Harness (Short Circuit) - Test
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Wiring Harness (Open Circuit) - Test
C-15 Truck Engine Engine Support (Front)
2002/06/01 A New Oil Filter Housing Assembly Is Used In The Oil Filter Groups {1306}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Cooler Bypass Valve - Remove and Install
2002/06/01 New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01 A Stronger Lever Assembly Is Used In The Fuel Injection Control Groups {1298}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
C-15 Truck Engine Electrical Ground Stud
Marine Monitoring System II Configuration
3524B Engine for Caterpillar Built Machines Engine Oil Filter Base - Assemble
2002/08/01 Engine Tool Lists And Machine Tool Lists Are Available On The CaterpillarIntranet {0600}
3408E and 3412E Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
2002/06/01 Engine Tool Lists And Machine Tool Lists Are Available On The Caterpillar Intranet {0600}
2002/05/27 Engine Tool Lists And Machine Tool Lists Are Available On The Caterpillar Intranet {0600}
3056E Industrial Engine Coolant Temperature Sensor
2002/07/15 New Flash File Software Is Used for Product Link 151/201 {7606, 7620}
2002/06/01 Use The 2P-4005 Engine Oil Filter Assembly If The Engine Is Equipped With Spin-on Oil Filters {1308}
C-15 Truck Engine Coolant Temperature Sensor
G3600 Engines Aftercooler
797B Off-Highway Truck Suspension Cylinder Pressure Sensor (Payload)
C-10 and C-12 Truck Engines Camshaft
3056E Industrial Engine Speed/Timing Sensor