Fuel Transfer Pump - Remove
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
Show/hide table
| 注意 |
|---|
|
在检查、保养、测试、调整及维修产品时，请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前，请准备好盛接液体用的适当容器。 |
- 切断发动机的燃油供应。
Show/hide table
注意 不要让脏物进入燃油系统。 彻底清洁将要拆开的燃油系统部件的周围区域。 在拆开的燃油系统部件上安放适当的盖。
Show/hide table
图 1 g01054098 - 拆下螺栓 (1)。
- 拆下螺栓 (2)。
- 断开管组件 (3) 和 (4)。 拆下燃油输油泵 (5)。
Caterpillar Information System:
C-15 Truck Engine Electrical Ground Stud
Marine Monitoring System II Configuration
3524B Engine for Caterpillar Built Machines Engine Oil Filter Base - Assemble
Marine Monitoring System II Engine Control Panel
3056E Industrial Engine Fuel Injection Nozzle - Test
SR4 HV and SR4B HV Generators Generator - Dry
3524B Engine for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
3056E Industrial Engine Engine Oil Cooler - Inspect
3056E Industrial Engine Fuel System Pressure - Test
3056E Industrial Engine Fuel System - Prime
C-15 Truck Engine Piston and Rings
C-15 Truck Engine Cylinder Liner
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
2002/06/01 A Stronger Lever Assembly Is Used In The Fuel Injection Control Groups {1298}
2002/06/01 New Service Information Tool for CAT Dealers is Now Available {1000}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Cooler Bypass Valve - Remove and Install
2002/06/01 A New Oil Filter Housing Assembly Is Used In The Oil Filter Groups {1306}
C-15 Truck Engine Engine Support (Front)
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Wiring Harness (Open Circuit) - Test
Product Link 151/201 Wiring Harness (Short Circuit) - Test
2002/06/01 Wiring Table For 3T-3678 Motor Assembly In Electric Prelube Pumps {1469}
2002/08/01 Engine Tool Lists And Machine Tool Lists Are Available On The CaterpillarIntranet {0600}
3408E and 3412E Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
2002/06/01 Engine Tool Lists And Machine Tool Lists Are Available On The Caterpillar Intranet {0600}