Fuel Transfer Pump - Install
- 将燃油输油泵 (5) 放置到位，然后安装螺栓 (2)。 连接管组件 (3) 和 (4)。
- 安装螺栓 (1)。
- 打开发动机的燃油供应。
Show/hide table
| |
| 图 1 | g01054098 |
Caterpillar Information System:
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
C-15 Truck Engine Electrical Ground Stud
Marine Monitoring System II Configuration
3524B Engine for Caterpillar Built Machines Engine Oil Filter Base - Assemble
Marine Monitoring System II Engine Control Panel
3056E Industrial Engine Fuel Injection Nozzle - Test
SR4 HV and SR4B HV Generators Generator - Dry
3524B Engine for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
3056E Industrial Engine Engine Oil Cooler - Inspect
3056E Industrial Engine Fuel System Pressure - Test
3056E Industrial Engine Fuel System - Prime
C-15 Truck Engine Piston and Rings
2002/06/01 A Stronger Lever Assembly Is Used In The Fuel Injection Control Groups {1298}
2002/06/01 New Service Information Tool for CAT Dealers is Now Available {1000}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Cooler Bypass Valve - Remove and Install
2002/06/01 A New Oil Filter Housing Assembly Is Used In The Oil Filter Groups {1306}
C-15 Truck Engine Engine Support (Front)
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Wiring Harness (Open Circuit) - Test
Product Link 151/201 Wiring Harness (Short Circuit) - Test
2002/06/01 Wiring Table For 3T-3678 Motor Assembly In Electric Prelube Pumps {1469}
2002/08/01 Engine Tool Lists And Machine Tool Lists Are Available On The CaterpillarIntranet {0600}
3408E and 3412E Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
2002/06/01 Engine Tool Lists And Machine Tool Lists Are Available On The Caterpillar Intranet {0600}
2002/05/27 Engine Tool Lists And Machine Tool Lists Are Available On The Caterpillar Intranet {0600}