3500 Industrial Engines Caterpillar


Fuel Injector

Usage:

3516 27Z


Illustration 1g03334934

Table 1
Specification for 111-3718 Fuel Injector Gp, and 4P-9075 Fuel Injector Gp 
Item  Qty  Part  Specification Description 
Injection timing dimension is 87.0 mm (3.43 inch)
4P-3487 Injector Spring  Length under test force is 81.99 mm (3.228 inch).
Test force is 280 ± 14 N (63 ± 3 lb).
Free length after test is 87.38 mm (3.440 inch)
5P-8065 O-Ring Seal  Lubricate the bore lightly with 1P-0808 Multipurpose Grease. 
194-5067 Case As  Torque to 140 ± 12 N·m (103 ± 9 lb ft)
194-9584 O-Ring Seal  Lubricate the bore lightly with 1P-0808 Multipurpose Grease. 
6V-1250 O-Ring Seal  Lubricate the bore lightly with 1P-0808 Multipurpose Grease. 
7C-9795 Cone  Torque to 75 ± 5 N·m (55 ± 4 lb ft)
2W-4726 Spring  Length under test force is 20.7 mm (0.81 inch).
Test force is 232 ± 7 N (52 ± 2 lb).
Free length after test is 22.94 mm (0.903 inch)

Caterpillar Information System:

C12 Marine Engine Inlet Manifold Pressure - Test
3408E and 3412E Industrial Engines Muffler
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Standby Pump Panel Wiring
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Standby Pump Panel Contactor - Adjust
CIPI UNDERCARRIAGE Arrangements: 3Q6662, 6Z7861, 6Z7885, 6Z7947, 6Z7957, 6Z7999, 9Q5044, 9Q5065, 9Q5082, 9Q5090, 9Q5093, 9Q5115, 9Q5118, 9Q5126, 9Q5135, 9Q5141, 9Q5168, 9Q5175, 9Q5206, 9Q5255, 9Q5259, 9Q5268, 9Q5412, 9Q5436, 9Q5464, 9Q5514, 9Q5617, 9 Final Drive - Install
3408E and 3412E Industrial Engines Circuit Breakers
CPT372 Truck Mounted Pumper Power End Oil and Filter - Change
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Standby Pump Panel Contactor - Test
3054 and 3056 Marine Generator Set Engines Heat Exchanger
CPT372 Truck Mounted Pumper Engine Oil Level - Check
CIPI UNDERCARRIAGE Arrangements: 3Q6662, 6Z7861, 6Z7885, 6Z7947, 6Z7957, 6Z7999, 9Q5044, 9Q5065, 9Q5082, 9Q5090, 9Q5093, 9Q5115, 9Q5118, 9Q5126, 9Q5135, 9Q5141, 9Q5168, 9Q5175, 9Q5206, 9Q5255, 9Q5259, 9Q5268, 9Q5412, 9Q5436, 9Q5464, 9Q5514, 9Q5617, 9 Final Drive - Disassemble
3054 and 3056 Industrial and Generator Set Engines Water Pump
3408E and 3412E Industrial Engines Air Cleaner
2002/02/01 New Lines Groups Are Used On The Continuous Prelube System {1307, 1319}
3408E and 3412E Industrial Engines CAN Data Link Circuit - Test
3408E and 3412E Industrial Engines Pressure Sensor (Auxiliary)
CIPI UNDERCARRIAGE Arrangements: 3Q-6662; 6Z-7861, 7885, 7947, 7957, 7999; 9Q-5044, 5065, 5082, 5090, 5093, 5115, 5118, 5126, 5135, 5141, 5168, 5175, 5206, 5255, 5259, 5268, 5412, 5436, 5464, 5514, 5617, 5618, 5716, 5741, 5742, 5758, 5826, 5831, 5846 Final Drive Sun Gear Removal
3500 Generator Set Engines Auxiliary Drive Housing
CIPI UNDERCARRIAGE Arrangements: 3Q-6662; 6Z-7861, 7885, 7947, 7957, 7999; 9Q-5044, 5065, 5082, 5090, 5093, 5115, 5118, 5126, 5135, 5141, 5168, 5175, 5206, 5255, 5259, 5268, 5412, 5436, 5464, 5514, 5617, 5618, 5716, 5741, 5742, 5758, 5826, 5831, 5846 Final Drive Ring Gear Removal
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Engine Sensor Open/Short Test
CIPI UNDERCARRIAGE Arrangements: 3Q-6662; 6Z-7861, 7885, 7947, 7957, 7999; 9Q-5044, 5065, 5082, 5090, 5093, 5115, 5118, 5126, 5135, 5141, 5168, 5175, 5206, 5255, 5259, 5268, 5412, 5436, 5464, 5514, 5617, 5618, 5716, 5741, 5742, 5758, 5826, 5831, 5846 Refill Capacities
CIPI UNDERCARRIAGE Arrangements: 166-7047, 177-3011, 177-3553, 177-4279, 200-2995, 200-4060, 204-0808, 212-6225, 213-8653, 215-7227, 218-2237, 231-5143, 3Q-6638, 3Q-6641, 6Z-7749, 6Z-7751, 6Z-7857, 6Z-7890, 6Z-7926, 6Z-7938, 6Z-7992, 9Q-5034, 9Q-5042 Final Drive Oil - Change
797F Off-Highway Truck Steering System Piston Pump (Steering) - Adjust
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Track Carrier Roller - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.