Control Module - Replace
Removal
In order to remove the control module, use the following procedure:
- Turn the Engine Control Switch (ECS) to STOP.
- Turn off the DC power supply.
- Disconnect the connectors on the back of the control module.
- Loosen the locking screws (1) .
Show/hide table
 | |
| Illustration 1 | g00861395 |
- Remove the locking clips from the control module.
- Remove the control module from the door of the control system.
Replace
- Place the control module into the control system door. Insert the control module from the front.
- Loosen locking screws (1) and fit locking clips to the control panel.
- Tighten locking screws (1) .
- Connect the connectors to the control module.
Caterpillar Information System:
3054 and 3056 Engines 550 Generator Set Control Panel Wiring Diagrams
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620} Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
3054 and 3056 Engines 550 Generator Set Control Panel Connector Contact Description
3054 and 3056 Engines 550 Generator Set Control Panel Troubleshooting
Power Module Switchgear (Low Voltage and Medium Voltage) Switchgear - Check
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 General Hazard Information
3054 and 3056 Marine Generator Set Engines Turbocharger - Install - 3054 Engine
3408E and 3412E Industrial Engines Aftercooler - Test
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Fuel Injector Mechanism
3126E and 3126B Commercial and Truck Engines Exhaust Brake
3054 and 3056 Marine Generator Set Engines Turbocharger - Remove - 3054 Engine
3054 and 3056 Engines 550 Generator Set Control Panel Initial Startup Procedure
325D and 329D Excavators Hydraulic System Swing Motor
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Track Adjustment - Inspect
SPT343 Truck Mounted Pumper Plate Locations and Film Locations
CIPI UNDERCARRIAGE Arrangements: 166-7047, 177-3011, 177-3553, 177-4279, 200-2995, 200-4060, 204-0808, 212-6225, 213-8653, 215-7227, 218-2237, 231-5143, 3Q-6638, 3Q-6641, 6Z-7749, 6Z-7751, 6Z-7857, 6Z-7890, 6Z-7926, 6Z-7938, 6Z-7992, 9Q-5034, 9Q-5042 Undercarriage - Check
3054 and 3056 Marine Generator Set Engines Turbocharger - Install - 3056 Engine
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Final Drive Sun Gear Removal
Power Module Switchgear (Low Voltage and Medium Voltage) Information Plate
3054 and 3056 Marine Generator Set Engines Crankcase Breather - Remove and Install
3054 and 3056 Marine Generator Set Engines Valve Mechanism Cover - Remove and Install
3054 and 3056 Marine Generator Sets Safety Messages
385B Excavator Machine System Specifications Bucket Adjuster
330C Forest Machine Hydraulic System Swing Drive