Soot Sensor - Remove and Install
- Disconnect the harness assembly from harness assembly (1) for Selective Catalytic Reduction (SCR) temperature sensor (2).
- Remove the SCR temperature sensor (2) from Clean Emissions Module (CEM) (1).
Show/hide table
| |
| Illustration 1 | g03730056 |
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | - | Bostik Pure Nickel Anti-Seize Compound |
1 |
- Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Show/hide table
Illustration 2 g03730056 - Lightly lubricate the thread of SCR temperature sensor (2) with Tooling (A). Install the SCR temperature sensor to CEM (1).
- Torque SCR temperature sensor (2) to a torque of
45 N·m (33 lb ft) . - Connect the harness assembly to harness assembly (1) for SCR temperature sensor (2).
Caterpillar Information System:
815K Soil Compactor Bottom Guard Lowering
814K Wheel Dozer Fuel System - Prime
374F Excavator Restricted Visibility
New Pressure Sensor Gp Is Now Available for Certain Cat® Products {1000, 1408, 1439, 1718, 1906, 1924} New Pressure Sensor Gp Is Now Available for Certain Cat® Products {1000, 1408, 1439, 1718, 1906, 1924}
An Improved Assembly Procedure for Hammer Power Group Is Now Available for Certain H55E and H55ES Hydraulic Hammers {5077, 6333, 7555} An Improved Assembly Procedure for Hammer Power Group Is Now Available for Certain H55E and H55ES Hydraulic Hammers {5077, 6333, 7555}
Field Assembly Procedure for Dragline Buckets {6001, 7960} Field Assembly Procedure for Dragline Buckets {6001, 7960}
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Piston Pump (Main Hydraulic) - Disassemble
Oil Leakage After Main Pump Shaft Seal Replacement {0663, 5070} Oil Leakage After Main Pump Shaft Seal Replacement {0663, 5070}
340F Excavator Declaration of Conformity
325F Excavator Engine Supplement Soot Antenna - Remove and Install
325F Excavator Engine Supplement Electronic Control Module - Remove and Install
538 Forest Machine Machine Systems Specifications
New Improved Oil Gauge Group Is Now Available On Certain Excavator Machine Engines {1326} New Improved Oil Gauge Group Is Now Available On Certain Excavator Machine Engines {1326}
303.5E2 CR Mini-HEX Machine ECM Sensor Signal (Analog, Passive) - Test
325F Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
349F and 352F Excavators Restricted Visibility
New Hydraulic Option Arrangement Package Tool 21 is Now Used for Certain 336F Excavators {5051, 7000} New Hydraulic Option Arrangement Package Tool 21 is Now Used for Certain 336F Excavators {5051, 7000}
725C2 Articulated Truck Brake Pads - Check
325F Excavator Engine Supplement Exhaust Back Pressure Valve - Remove and Install
325F Excavator Engine Supplement Nitrogen Oxide Sensor - Remove and Install
816K Landfill Compactor Fuel Filter (In-Line) - Replace
Serviceable Parts for the Boom and Stick Boss are Available for Certain Excavators {6501, 6502} Serviceable Parts for the Boom and Stick Boss are Available for Certain Excavators {6501, 6502}
349D2 MHPU Mobile Hydraulic Power Unit (OEM) Swing Drive Oil Sample - Obtain
349D2 MHPU Mobile Hydraulic Power Unit (OEM) Swing Drive Oil Level - Check