Fan and Fan Drive - Remove and Install
- Open the right side hood.
Show/hide table
Illustration 1 g06037372 - Remove fan guard (1).
Show/hide table
Illustration 2 g06037382 - Disconnect harness assembly (2) from the alternator.
Show/hide table
Illustration 3 g06037394 - Remove belt (3). Refer to Operation and Maintenance Manual, Belt - Inspect/Adjust/Replace for removing the belt.
Show/hide table
Illustration 4 g06037436 - Remove six bolts (5). Remove fan and fan drive (4).
- Install fan and fan drive (4) in the reverse order of removal.
Caterpillar Information System:
An Improved Bucket Pin is Now Used on Certain 312D/D2 and 313D/D2 Excavators {6513} An Improved Bucket Pin is Now Used on Certain 312D/D2 and 313D/D2 Excavators {6513}
XQP150 Rental Generator Set Engine Starting
336D2/336D2 GC Excavator Engine Supplement Engine - Remove and Install
336D2/336D2 GC Excavator Engine Supplement Engine Front Mount - Remove and Install
336D2/336D2 GC Excavator Engine Supplement Engine Rear Mount - Remove and Install
336D2/336D2 GC Excavator Engine Supplement Air Cleaner - Remove and Install
336D2/336D2 GC Excavator Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
336D2/336D2 GC Excavator Engine Supplement Air Inlet Elbow - Remove and Install
C9.3 Exhaust Rocker Arm Foot Failures {1123} C9.3 Exhaust Rocker Arm Foot Failures {1123}
330F MHPU Mobile Hydraulic Power Unit Capacities (Refill)
815K, 816K Compactor Engine Supplement Clean Emissions Module - Remove and Install
3524B Engine for Caterpillar Built Machines Water Pump - Assemble
XQP1100 Generator Set Engine Stopping
303.5E2 CR Mini-HEX Machine ECM CAN Data Link - Test
Wiper Arm May Interfere with Boom Tube Clamp on Certain Mini Hydraulic Excavators {5057} Wiper Arm May Interfere with Boom Tube Clamp on Certain Mini Hydraulic Excavators {5057}
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System CAN Data Link - Test
303.5E2 CR Mini-HEX Machine ECM Electrical Power Supply - Test
538 Forest Machine Machine Systems Specifications
325F Excavator Engine Supplement Electronic Control Module - Remove and Install
325F Excavator Engine Supplement Soot Antenna - Remove and Install
340F Excavator Declaration of Conformity
Oil Leakage After Main Pump Shaft Seal Replacement {0663, 5070} Oil Leakage After Main Pump Shaft Seal Replacement {0663, 5070}
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Piston Pump (Main Hydraulic) - Disassemble
Field Assembly Procedure for Dragline Buckets {6001, 7960} Field Assembly Procedure for Dragline Buckets {6001, 7960}