Receiving Inspection and Storage
Carefully unpack the transfer switch. Inspect the transfer switch for any damage that may have occurred during shipment.
Before installation, it is necessary to store the transfer switch in a clean dry place. The transfer switch should be protected from dirt and water. Provide adequate air circulation and heat in order to prevent condensation.
The transfer switch should be stored at a temperature range of -30° to 80°C (-22° to 185°F).
A 40 to 400 Amp molded case transfer switch should be operated at a temperature range of -20° to 75°C (-4° to 167°F). A 400 to 4000 Amp metal frame transfer switch should be operated at a temperature range of -20° to 60°C (-4° to 140°F).
The transfer switch should be stored and operated in 5% to 95% humidity.
Caterpillar Information System:
3500B and 3500 Marine Propulsion Engines with EUI Option Engine Oil and Filter - Change
G3406 Engine Turbocharger
G3406 Engine Exhaust Manifold
G3406 Engine Aftercooler
G3408C and G3412C Engines Engine Monitoring System
G3406 Engine Electronic Control System Operation
Electronic Modular Control Panel II (EMCP II) Electrical Converter (Pulse Width Modulated)
2001/09/01 A New Hose Assembly That Is Made From Stainless Steel Is Used In The Turbocharger Cleaner Groups {1052}
G3406 Engine Gas Pressure Regulator
G3408C and G3412C Engines Air/Fuel Ratio Control - Oxygen Feedback
2007/04/30 Maintenance Recommendations for the Crankshaft Vibration Dampers {1205}
G3406 Engine Governor
G3408C and G3412C Engines Exhaust Bypass Valve
G3406 Engine Valve System Components
3024C Engine for Caterpillar Built Machines Fuel Injection Pump
Automatic Transfer Switches CTG, CTGD Series Mounting
Automatic Transfer Switches CTS, CTSD Series Power Connections of the Transfer Switch
3176C and 3196 Engines For Caterpillar Built Machines Pistons and Connecting Rods - Assemble
SBF214 and SUF557 Skid Mounted Power Packs Model View Illustrations
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Nozzles
2001/08/01 The Connecting Rod Bearing Now Has Marks For Identification On The Outside Of Each Bearing Half {1219}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Transfer Pump
2001/08/20 Service Information System Product Structure Link Change for Service Letters that Address Parts Stock Distribution {1000, 7000, 7750}
Automatic Transfer Switches CTS, CTSD Series Control Connections of the Transfer Switch