Illustration 1 | g00819065 |
An adequate lifting method must be used to mount the transfer switch. The recommended method for moving the transfer switch by using the lifting eyes and a spreader bar is illustrated in illustration 1. Enough room should be allowed to open the cabinet doors fully for inspection and servicing of the transfer switch per NEC and local codes.
Make sure that the conditions of the site are appropriate for the system. There are several different enclosures that can be ordered with the system. The appropriate conditions are dependent on the enclosure that is ordered with the system.
Note: When you lift the transfer switch with a spreader bar, height H must be equal to half of distance D.
Cover the transfer switch before drilling any holes in the cabinet. Failure to cover the transfer switch may result in damage to the switch.