Engine Oil Cooler - Remove
拆卸步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 将机油从发动机机油冷却器放入适当的容器中，以便保存或废弃处理。 请参阅操作和保养手册, "发动机机油和滤清器 - 更换"。
- 从冷却系统将冷却液排入合适的容器以便保存或废弃这些冷却液。 请参考操作和保养手册, "冷却系统冷却液 - 更换"。
- 从发动机上拆下管 (1) 。
Show/hide table
 | |
| 图 1 | g00770450 |
- 拆下夹子 (3) 和螺栓 (2) 。 作为一个组件拆下阀帽 (4) 和适配器。
- 从阀帽 (4) 上拆下适配器 (5) 。 从适配器上拆下 O 形密封圈。
Show/hide table
 | |
| 图 2 | g00770451 |
- 拆下夹子 (8) 。
Show/hide table
 | |
| 图 3 | g01163454 |
- 作为一个组件拆下弯头 (6) 、旁通阀体 (7) 和机油冷却器 (9) 。
- 检查密封垫和 O 形密封圈的状况。 如果密封垫或 O 形密封圈磨损或损坏，则用新零件更换。
Caterpillar Information System:
3408E and 3412E Engines for Caterpillar Built Machines Poor Acceleration or Response
C11 and C13 Engines for Caterpillar Built Machines Low Power/Poor or No Response to Throttle
3126B and 3126E On-highway Engines Coolant Temperature Sensor - Remove and Install
PM3500 Power Modules Voltage Regulators
3406E Marine Engine Water Temperature Regulator - Remove and Install
PM3500 Power Modules Parallel Operation
3126B and 3126E On-highway Engines Fast Idle Enable Circuit - Test
2001/03/01 The Booklet, SENR9620, "Improving Fuel System Durability" Is Available {1250}
3406E and C15 Marine Engines Electronic Control Module - Remove and Install
3406E Marine Engine Fuel Transfer Pump - Install
3406E and C15 Marine Engines Fuel Transfer Pump - Remove
3524B Engines for 797 and 797B Off-Highway Trucks Flywheel - Inspect
3126B and 3126E On-highway Engines Injection Actuation Pressure Sensor - Remove and Install
C-9 Engines for Caterpillar Built Machines Fuel System
3406E and C15 Marine Engines Engine Oil Cooler - Install
3126B and 3126E On-highway Engines Engine Oil Pressure Sensor - Remove and Install
3126B and 3126E On-highway Engines Wait To Start Lamp Circuit - Test
PM3516 Power Modules Fuel Transfer System - Prime
C-9 Engines for Caterpillar Built Machines Lubrication System
2001/02/01 Corrections to Operation and Maintenance Manual, SEBU7252-03, "3500B High Displacement Generator Set Engines" {1000, 1900, 7500, 7595, 7595}
2001/02/19 The Booklet, SENR9620, "Improving Fuel System Durability" Is Available {1250}
3406E and C15 Marine Engines Engine Oil Cooler - Disassemble
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Engine Speed/Timing Sensor - Calibrate
3126B and 3126E On-highway Engines Service Brake Pedal Position (Switch 2) Circuit - Test