A New ADEM 2000 ECM is Now Available {1901}
- Engine:
- C-10 (S/N: 3CS1-UP)
- C-12 (S/N: 2KS1-UP; 9SM1-UP)
- C-15 (S/N: 6NZ1-UP)
- C-16 (S/N: 7CZ1-UP)
- 3406E (S/N: 1MM1-UP; 2WS1-UP)
Description of Change: A new ECM is now available for these engines.
Adaptable To: The new 179-1747 Engine Electronic Control Group (ECM) is a direct replacement for 157-3705 Engine Electronic Control Group (ECM). The former ECM is no longer serviced.
Table 1 shows the effective serial numbers for the new 179-1747 Engine Electronic Control Group (ECM). The new 179-1747 Engine Electronic Control Group (ECM) is adaptable to the first production for the engines that are listed above.
Show/hide table
Engine     | Effective Serial Number     |
C-10     | (S/N: 3CS15846-15933; 3CS18746-UP)     |
C-12     | (S/N: 2KS52766-52928; 2KS61698-UP)     |
C-12     | (S/N: 9SM00088-00091; 9SM00256-UP)     |
C-15     | (S/N: 6NZ22363-22697; 6NZ38938-38945; 6NZ38959-UP)     |
C-16     | (S/N: 7CZ01251-01268; 7CZ01963-UP)     |
Caterpillar Information System:
Exhaust Temperature Scanner Alarm Description
3126B Industrial Engines Sensors and Electrical Connectors
3054 and 3056 Marine Generator Set Engines Heat Exchanger - Test
3054 and 3056 Industrial and Generator Set Engines Valve Guide - Inspect
C-15 and C-16 Industrial Engines Customer Specified Parameters
Exhaust Temperature Scanner System Configuration Parameters (Scanner)
C-15 and C-16 Industrial Engines Reference Numbers
3054 and 3056 Industrial and Generator Set Engines Valve Depth - Inspect
3046 Engine for Caterpillar Built Machines Increased Engine Oil Temperature - Inspect
Exhaust Temperature Scanner Setpoints
3126B Industrial Engine Engine Oil Filter Base - Install
G3516B and G3520B Generator Set Engines Water Temperature Regulators - Install
3054 Engine Piston Height - Inspect
3054, 3054B and 3056 Marine Engines Piston and Rings
3126B Industrial Engines Intermittent Engine Shutdown
3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Turbocharger
3406E and 3456 Generator Set Engines General Information
3126B Industrial Engines Intermittent Low Power or Power Cutout
2001/02/01 A New Fuel Transfer Pump is Now Available for 3054 Engines {1256}
3054 Engine Cylinder Block - Inspect
3054, 3054B and 3056 Marine Engines Air Inlet Heater - Test
2001/01/15 Improvements to Caterpillar's Gasket Kits for Engines {7555}
3126B Petroleum Engine Engine Cranks but Will Not Start
G3516B and G3520B Generator Set Engines Fuel Control Valve - Remove and Install