300.9D VPS Mini Hydraulic Excavator Machine Systems Caterpillar


Flywheel Housing

Usage:

300.9D DW2


Illustration 1g03549778

Table 1
Specification for Flywheel Housing 
Item  Qty  Part  Specification Description 
Note: Before installation of the flywheel housing, inspect the front face of the flywheel housing and the rear face of the cylinder block. The components must be free of the following substances: oil, fuel, water, gasket adhesive, assembly compounds, and any other foreign material.
To seal the joint between the flywheel housing and the cylinder block, apply sealant to the mating surface of the flywheel housing. 
Bolt  Torque to 80.4 to 86.4 N·m (59.3 to 63.7 lb ft)

Caterpillar Information System:

300.9D VPS Mini Hydraulic Excavator Machine Systems Starter Motor
C7.1 Engines For Caterpillar Built Machines Engine Misfires, Runs Rough or Is Unstable
300.9D VPS Mini Hydraulic Excavator Machine Systems Cylinder Head
300.9D VPS Mini Hydraulic Excavator Machine Systems Connecting Rod
300.9D VPS Mini Hydraulic Excavator Machine Systems Main Bearing Journal
C6.6 Industrial Engine Exhaust Manifold and Turbocharger - Remove
C6.6 Industrial Engine Exhaust Manifold and Turbocharger - Install
C7.1 Engines For Caterpillar Built Machines Engine Cranks but Does Not Start
300.9D Mini Hydraulic Excavator Fuel Injection Pump
300.9D VPS Mini Hydraulic Excavator Machine Systems Engine Design
730 EJ Articulated Truck Ejector Blade Alignment - Check/Adjust
300.9D VPS Mini Hydraulic Excavator Machine Systems Swivel
C7.1 Engines For Caterpillar Built Machines Engine Speed Does Not Change
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit Machine Systems Upper Frame and Undercarriage Frame - Separate
C7.1 Engines For Caterpillar Built Machines Engine Stalls at Low RPM
300.9D and 300.9D VPS Mini Hydraulic Excavator Blade Linkage - Lubricate
C7.1 Engines For Caterpillar Built Machines Engine Top Speed Is Not Obtained
Wheeled Excavators Monitoring System Configuration Menu
300.9D Mini Hydraulic Excavator Boom Hydraulic System
Wheeled Excavators Monitoring System Override Parameters Menu
Wheeled Excavators Monitoring System Tool Programming Menu
300.9D and 300.9D VPS Mini Hydraulic Excavator Belt - Inspect
Wheeled Excavators Monitoring System WinFlash Menu
2012/04/24 Some Condensation May Be Noticed in the Crankcase of Machines Equipped with Tier 4 Engines {1000}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.