Tool Programming Menu
用户可以使用 "Tool Program（机具编制）"菜单更改所选机具的设定。
Show/hide table
 | |
| 图 1 | g03711448 |
Show/hide table
 | |
| 图 2 | g03708683 |
(1) 小键盘制导区 (2) 向左键 (3) 向上键 (4) 向下键 (5) 向右键 | |
通过从 "Service（维修）"菜单中选择 "Tool Program（机具编程）"菜单来进入 "Tool Program（机具编程）"菜单选项。 按向上或向下键，直至 "Tool Program（机具编程）"突出显示，然后按"确定"键。
注: 请参阅系统操作, "维修模式"以了解使用 "Service（维修）"菜单的简介。
按向上键或向下键，直到选中所需机具。 按"确定"键编程设定所选机具。 将显示以下屏幕。
Show/hide table
 | |
| 图 3 | g03711442 |
"Tool Program（机具编程）"设定项的典型屏幕。 | |
按向上键或向下键突出显示要更改的参数。
按"确定"键将光标从设定值移到数据值。 该数据值将突出显示。
按向上或向下键更改数据值。 按"确定"键设定该值。
注: 指示的项目因型号而异。
机具配置（单向）
Show/hide table
 | |
| 图 4 | g03708153 |
- 使用向上和向下键选择所需值。
- 使用向左或向右键更改值（或通过按下中间功能键启用数字键盘）。
- 按"确定"保存更改值。
Caterpillar Information System:
Wheeled Excavators Monitoring System Override Parameters Menu
300.9D Mini Hydraulic Excavator Boom Hydraulic System
Wheeled Excavators Monitoring System Configuration Menu
C7.1 Engines For Caterpillar Built Machines Engine Top Speed Is Not Obtained
300.9D and 300.9D VPS Mini Hydraulic Excavator Blade Linkage - Lubricate
C7.1 Engines For Caterpillar Built Machines Engine Stalls at Low RPM
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit Machine Systems Upper Frame and Undercarriage Frame - Separate
C7.1 Engines For Caterpillar Built Machines Engine Speed Does Not Change
300.9D VPS Mini Hydraulic Excavator Machine Systems Flywheel Housing
300.9D VPS Mini Hydraulic Excavator Machine Systems Starter Motor
C7.1 Engines For Caterpillar Built Machines Engine Misfires, Runs Rough or Is Unstable
300.9D VPS Mini Hydraulic Excavator Machine Systems Cylinder Head
300.9D and 300.9D VPS Mini Hydraulic Excavator Belt - Inspect
Wheeled Excavators Monitoring System WinFlash Menu
2012/04/24 Some Condensation May Be Noticed in the Crankcase of Machines Equipped with Tier 4 Engines {1000}
Wheeled Excavators Monitoring System System Schematic
C7.1 Engines For Caterpillar Built Machines Fuel Rail Pressure Problem
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Hammer
2011/03/16 A New Procedure is Available to Improve the Durability of the Reach Sticks on Certain Excavators {6502}
2011/03/16 Bucket Retrofit for Certain 365C and 385C Excavators {6503, 6513}
2011/05/09 Improved Performance for the Travel System for 308D CR Excavators {4050, 5051}
Update Procedure for the Travel System on 308D CR Excavators{4050, 5051} Update Procedure for the Travel System on 308D CR Excavators{4050, 5051}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Buffer - Bottom
300.9D and 300.9D VPS Mini Hydraulic Excavator Boom, Stick and Bucket Linkage - Lubricate