Engine Speed Does Not Change
- Diagnostic codes
- Engine speed dial
- Backup throttle switches
Use one of the following methods to check for active diagnostic codes:
- The electronic service tool
- The display on the control panel
Electronic Service Tool
- Connect the electronic service tool to the diagnostic connector.
- Check for active diagnostic codes on the electronic service tool.
- Investigate any active codes before continuing with this procedure. Refer to Troubleshooting, "Troubleshooting with a Diagnostic Code".
Display on the Control Panel
Note: The following procedure is only applicable if the application is equipped with a display on the control panel.
- Check the display on the control panel for active diagnostic codes.
- Troubleshoot any active codes before continuing with this procedure. Refer to Troubleshooting, "Troubleshooting with a Diagnostic Code".
If the engine speed does not change when using the engine speed dial, refer to the Troubleshooting Guide for the machine application.
If the engine speed does not change when using the backup throttle switches, refer to Troubleshooting, "Throttle Switch Circuit - Test".
Caterpillar Information System:
300.9D VPS Mini Hydraulic Excavator Machine Systems Flywheel Housing
300.9D VPS Mini Hydraulic Excavator Machine Systems Starter Motor
C7.1 Engines For Caterpillar Built Machines Engine Misfires, Runs Rough or Is Unstable
300.9D VPS Mini Hydraulic Excavator Machine Systems Cylinder Head
300.9D VPS Mini Hydraulic Excavator Machine Systems Connecting Rod
300.9D VPS Mini Hydraulic Excavator Machine Systems Main Bearing Journal
C6.6 Industrial Engine Exhaust Manifold and Turbocharger - Remove
C6.6 Industrial Engine Exhaust Manifold and Turbocharger - Install
C7.1 Engines For Caterpillar Built Machines Engine Cranks but Does Not Start
300.9D Mini Hydraulic Excavator Fuel Injection Pump
300.9D VPS Mini Hydraulic Excavator Machine Systems Engine Design
730 EJ Articulated Truck Ejector Blade Alignment - Check/Adjust
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit Machine Systems Upper Frame and Undercarriage Frame - Separate
C7.1 Engines For Caterpillar Built Machines Engine Stalls at Low RPM
300.9D and 300.9D VPS Mini Hydraulic Excavator Blade Linkage - Lubricate
C7.1 Engines For Caterpillar Built Machines Engine Top Speed Is Not Obtained
Wheeled Excavators Monitoring System Configuration Menu
300.9D Mini Hydraulic Excavator Boom Hydraulic System
Wheeled Excavators Monitoring System Override Parameters Menu
Wheeled Excavators Monitoring System Tool Programming Menu
300.9D and 300.9D VPS Mini Hydraulic Excavator Belt - Inspect
Wheeled Excavators Monitoring System WinFlash Menu
2012/04/24 Some Condensation May Be Noticed in the Crankcase of Machines Equipped with Tier 4 Engines {1000}
Wheeled Excavators Monitoring System System Schematic