New Hydraulic Oil Coolers with Copper-Nickel Alloy Tubes Resist Corrosion {1374}
- Caterpillar Products: with 4W-5363 Hydraulic Oil Cooler Core
- All
A new 190-3832 Hydraulic Oil Cooler Core is now available to address problems in specific applications. These coolers contain copper-nickel alloy tubes that have increased resistance to corrosion. Specific applications may see a life that is less than the acceptable life due to water or contamination in the hydraulic oil. The new 190-3832 Hydraulic Oil Cooler Core is a direct replacement for the existing 4W-5363 Hydraulic Oil Cooler Core.
Caterpillar Information System:
2000/08/28 New Hydraulic Oil Coolers with Copper-Nickel Alloy Tubes Resist Corrosion {1374}
PM3500 Power Modules Fuel System - Fill
SPS343 Skid Mounted Pumper Safety Messages
Machine Security System Electronic Control Module (ECM) - Replace
Machine Security System System Schematic
Machine Security System General Information
Machine Security System General Information
3126B and 3126E On-highway Engines Input Selection Switch Circuit - Test
3126B Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
3500 Engines For Caterpillar Built Power Modules Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
C9 Urban Transit Bus Engine Customer Specified Parameters Worksheet
PM3412C Power Modules Machine Lifting
JF Series Starting Motor Pinion Does Not Engage Ring Gear While Armature Turns
3126B and 3126E On-highway Engines Exhaust Brake Circuit - Test
G3406 Engine Measuring Exhaust Temperature
JF Series Starting Motor Starting Motor Continues to Operate after Start Switch Has Been Released
2000/09/01 A Notification List is Available for 3000 Family (Commercial) Engines {1000}
JF Series Starting Motor Starting Motor Solenoid - Test
325D and 329D Excavators Radio - If Equipped
3176C and 3196 Engines for Caterpillar Built Machines Engine Cranks but Will Not Start
Installation and Maintenance of the Powered Fumes Disposal Filter {1074} Installation and Maintenance of the Powered Fumes Disposal Filter {1074}
3126B and 3126E On-highway Engines Transmission (AT/MT/HT) Relay Circuit - Test
3126B Engines Electrical System
3176C and 3196 Engines for Caterpillar Built Machines Intermittent Low Power or Power Cutout