323D MHPU Mobile Hydraulic Power Unit Machine System Specifications Caterpillar


Fuel Tank

Usage:

323D LN DCJ



Illustration 1g01593713

(1) Apply 1U-8846 Gasket Sealant to the flange surface of the rubber gasket.

(2) Torque for five screws ... 1.4 ± 0.1 N·m (12 ± 1 lb in)

(3) Apply 5P-3413 Pipe Sealant to the threads of the pipe plug.




Illustration 2g01593736

View A-A

(4) Apply 5P-3413 Pipe Sealant to the threads of the valve assembly.

(5) Apply 5P-3413 Pipe Sealant to the threads of the hose end.

Caterpillar Information System:

314D CR Hydraulic Excavator Machine Systems Swing Motor - Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Electronic Control Module (ECM) - Replace
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System Electronic Control Module (ECM) - Replace
M316D, M318D and M322D Wheeled Excavators Machine Systems Boom - Install - Standard Boom
2008/09/22 Improved Material is Now Used on Hose Assemblies that Are for the Engine Oil Filter for Certain Mini Hydraulic Excavators {1306, 1307, 1308}
Low or Erratic Hydraulic Power is Experienced on Certain Wheeled Excavators{5455} Low or Erratic Hydraulic Power is Experienced on Certain Wheeled Excavators{5455}
314D CR Hydraulic Excavator Machine Systems Swing Motor - Remove
2008/06/30 Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump {1256}
Temporary Weld Repair for Crack in Lower Jaw of Shear{6349} Temporary Weld Repair for Crack in Lower Jaw of Shear{6349}
2008/07/14 Correction to the Parts Manual , "Filter Gp-Fuel" for Excavators {1261}
320D Excavator Mirror - If Equipped
314D CR Hydraulic Excavator Machine Systems Speed Control - Remove and Install
385C Excavator and 385C Front Shovel Machine System Specifications Accumulator (Pilot)
330B Excavator Machine System Specifications Flow Control Valve
2008/08/11 New Software For the Engine ECM is Now Available {1901, 7600, 7620}
2008/07/14 Updated Electronic Unit Injectors {1290, 1901}
314D CR Hydraulic Excavator C4.2 Engine Supplement Refrigerant Compressor - Remove and Install
2008/09/01 The Pump Control Valve Has Been Improved on Certain Mini Hydraulic Excavators {5455}
314D CR Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Remove - Right Hand
Procedure for Replacing the Pump Control Valve on Certain Mini Hydraulic Excavators{5455} Procedure for Replacing the Pump Control Valve on Certain Mini Hydraulic Excavators{5455}
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Pilot Valve (Boom Drift Reduction)
319D Excavator Machine System Specifications Pilot Valve (Travel)
314D CR Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Install - Right Hand
314D CR Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Remove - Left Hand
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.