New Software For the Engine ECM is Now Available {1901, 7600, 7620}
- Excavator:
- M313D (S/N: W3H1-UP)
- M315D (S/N: W5M1-UP)
- M316D (S/N: W6A1-UP)
- M318D (S/N: W8P1-UP; W8R1-UP)
- M322D (S/N: W2S1-UP; W2T1-UP)
New software for the engine ECM is now available for the machines that are listed above if the machines are equipped with the Machine Security System (MSS). The new software will improve the communications between the Engine ECM and the Machine ECM. Caterpillar recommends installing the new software at the next scheduled service. Refer to Table 1 for the software part numbers.
Show/hide table
Software Part Numbers For The Engine ECM     | |||
---|---|---|---|
Model     | Software Part Number     | Affected S/N     | Effective S/N     |
M313D     | 315-8737     | S/N:W3H1-561     | S/N:W3H562-UP     |
M315D     | 316-0647     | S/N:W5M1-525     | S/N:W5M526-UP     |
M316D     | 321-8961     | S/N:W6A1-494     | S/N:W6A495-UP     |
M318D     | 318-3677     | S/N:W8P1-732     | S/N:W8P733-UP     |
M322D     | 318-3676     | S/N:W2S1-299     | S/N:W2S300-UP     |
M318D MH     | 318-3677     | S/N:W8R1-236     | S/N:W8R237-UP     |
M322D MH     | 318-3676     | S/N:W2T1-306     | S/N:W2T307-UP     |
Caterpillar Information System:
330B Excavator Machine System Specifications Flow Control Valve
385C Excavator and 385C Front Shovel Machine System Specifications Accumulator (Pilot)
323D MHPU Mobile Hydraulic Power Unit Machine System Specifications Fuel Tank
314D CR Hydraulic Excavator Machine Systems Swing Motor - Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Electronic Control Module (ECM) - Replace
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System Electronic Control Module (ECM) - Replace
M316D, M318D and M322D Wheeled Excavators Machine Systems Boom - Install - Standard Boom
2008/09/22 Improved Material is Now Used on Hose Assemblies that Are for the Engine Oil Filter for Certain Mini Hydraulic Excavators {1306, 1307, 1308}
Low or Erratic Hydraulic Power is Experienced on Certain Wheeled Excavators{5455} Low or Erratic Hydraulic Power is Experienced on Certain Wheeled Excavators{5455}
314D CR Hydraulic Excavator Machine Systems Swing Motor - Remove
2008/06/30 Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump {1256}
Temporary Weld Repair for Crack in Lower Jaw of Shear{6349} Temporary Weld Repair for Crack in Lower Jaw of Shear{6349}
2008/07/14 Updated Electronic Unit Injectors {1290, 1901}
314D CR Hydraulic Excavator C4.2 Engine Supplement Refrigerant Compressor - Remove and Install
2008/09/01 The Pump Control Valve Has Been Improved on Certain Mini Hydraulic Excavators {5455}
314D CR Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Remove - Right Hand
Procedure for Replacing the Pump Control Valve on Certain Mini Hydraulic Excavators{5455} Procedure for Replacing the Pump Control Valve on Certain Mini Hydraulic Excavators{5455}
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Pilot Valve (Boom Drift Reduction)
319D Excavator Machine System Specifications Pilot Valve (Travel)
314D CR Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Install - Right Hand
314D CR Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Remove - Left Hand
M316D, M318D and M322D Wheeled Excavators Machine Systems Fore Boom - Remove
314D CR Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Install - Left Hand
M316D, M318D and M322D Wheeled Excavators Machine Systems Fore Boom - Install