2008/07/14 Caterpillar


Updated Electronic Unit Injectors {1290, 1901}

Usage:

CP-56 C5P
Asphalt Paver:
AP655D (S/N: GNZ22-23)
Excavator:
M316D (S/N: W6A291-294)
M318D (S/N: W8P51-51,441-441)
M322D (S/N: W2S116-116,118-118)
Paving Compactor:
CP56 (S/N: C5P11-12)
CP64 (S/N: C6P1-1)
CS56 (S/N: C5S11-13; FCS1-1,11-11)
CS64 (S/N: C6S1-1)
CS74 (S/N: C8F1-1; C8S11-11)
CS76 (S/N: CYX11-12)
Track-Type Loader:
953D (S/N: LBP16-16,156-157,159-159,162-162,251-251)
963D (S/N: LCS21-22,24-24,211-212,214-219,221-221,226-226,228-229,231-232,234-236,238-238,244-245,259-259,262-262,265-266,269-269,271-271,275-276,298-298)

There have been isolated instances of problems with certain flash files. In some instances, the technician is not able to follow the correct procedures in Troubleshooting. This is due to the fact that the "Fuel System Verification Test" is not supported in the earlier software.

Some engines will require a new flash file. This depends on the current engine software. Other engines will require a new flash file and new electronic unit injectors.

The electronic unit injectors should be replaced if the following occurs:

  • Damage to the electronic unit injectors

  • The diagnostic procedure recommends a replacement electronic unit injector.

The new flash file will support the "Fuel System Verification Test". For more information about flash files, refer to Troubleshooting, "Flash Programming".

Caterpillar Information System:

2008/08/11 New Software For the Engine ECM is Now Available {1901, 7600, 7620}
330B Excavator Machine System Specifications Flow Control Valve
385C Excavator and 385C Front Shovel Machine System Specifications Accumulator (Pilot)
323D MHPU Mobile Hydraulic Power Unit Machine System Specifications Fuel Tank
314D CR Hydraulic Excavator Machine Systems Swing Motor - Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Electronic Control Module (ECM) - Replace
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System Electronic Control Module (ECM) - Replace
M316D, M318D and M322D Wheeled Excavators Machine Systems Boom - Install - Standard Boom
2008/09/22 Improved Material is Now Used on Hose Assemblies that Are for the Engine Oil Filter for Certain Mini Hydraulic Excavators {1306, 1307, 1308}
Low or Erratic Hydraulic Power is Experienced on Certain Wheeled Excavators{5455} Low or Erratic Hydraulic Power is Experienced on Certain Wheeled Excavators{5455}
314D CR Hydraulic Excavator Machine Systems Swing Motor - Remove
2008/06/30 Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump {1256}
314D CR Hydraulic Excavator C4.2 Engine Supplement Refrigerant Compressor - Remove and Install
2008/09/01 The Pump Control Valve Has Been Improved on Certain Mini Hydraulic Excavators {5455}
314D CR Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Remove - Right Hand
Procedure for Replacing the Pump Control Valve on Certain Mini Hydraulic Excavators{5455} Procedure for Replacing the Pump Control Valve on Certain Mini Hydraulic Excavators{5455}
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Pilot Valve (Boom Drift Reduction)
319D Excavator Machine System Specifications Pilot Valve (Travel)
314D CR Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Install - Right Hand
314D CR Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Remove - Left Hand
M316D, M318D and M322D Wheeled Excavators Machine Systems Fore Boom - Remove
314D CR Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Install - Left Hand
M316D, M318D and M322D Wheeled Excavators Machine Systems Fore Boom - Install
2008/07/07 Improved Links Are Available For Certain Thumbs {6513, 6547}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.