Speed Control - Remove and Install
- Remove screws (1) and remove cover (2).
Show/hide table
Illustration 2 g01592428 - Disconnect harness assembly (5) for the speed control. Remove screws (3) and remove speed control (4).
Show/hide table
| |
| Illustration 1 | g01592400 |
- Install speed control (4) and screws (3). Connect harness assembly (5) for the speed control.
Show/hide table
Illustration 4 g01592400 - Install cover (2) and screws (1).
Show/hide table
| |
| Illustration 3 | g01592428 |
Caterpillar Information System:
314D CR Hydraulic Excavator Machine Systems Pressure Switch (Refrigerant Pressure Cutoff) - Remove and Install
2008/09/22 A New Connector and a New Elbow Are Available for Increased Reliability of the Solenoid Valve on the Main Hydraulic Pump {5057, 5059}
2008/07/14 A New Manufacturing Process for the Pipe Assembly Between the Turbocharger Compressor and the Aftercooler is Available for Improved Durability {1087}
385C MHPU Mobile Hydraulic Power Unit Hydraulic System Specifications
M316D, M318D and M322D Wheeled Excavators Machine Systems Boom - Remove - Standard Boom
Filtration Procedure for Wheel Loader, Wheel Dozer, Soil Compactor, Landfill Compactor Hydraulic Oil {0680, 0768, 5056, 5068} Filtration Procedure for Wheel Loader, Wheel Dozer, Soil Compactor, Landfill Compactor Hydraulic Oil {0680, 0768, 5056, 5068}
M316D, M318D and M322D Wheeled Excavators Machine Systems Boom Cylinder - Remove and Install
385C MHPU Mobile Hydraulic Power Unit Hydraulic System Swing Speed and Swing Drift on a Slope - Check
2008/10/20 A New Modular Handle Gp Is Available for the Joystick Control Gp {5705}
314D CR Hydraulic Excavator Machine Systems Actuator Motor (Damper Assembly) - Remove and Install
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Machine System Specifications Gear Pump (Pilot, Work Tool, Swing, and Travel)
314D CR Hydraulic Excavator Machine Systems Priority Valve - Assemble - Boom
320D Excavator Mirror - If Equipped
2008/07/14 Correction to the Parts Manual , "Filter Gp-Fuel" for Excavators {1261}
Temporary Weld Repair for Crack in Lower Jaw of Shear{6349} Temporary Weld Repair for Crack in Lower Jaw of Shear{6349}
2008/06/30 Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump {1256}
314D CR Hydraulic Excavator Machine Systems Swing Motor - Remove
Low or Erratic Hydraulic Power is Experienced on Certain Wheeled Excavators{5455} Low or Erratic Hydraulic Power is Experienced on Certain Wheeled Excavators{5455}
2008/09/22 Improved Material is Now Used on Hose Assemblies that Are for the Engine Oil Filter for Certain Mini Hydraulic Excavators {1306, 1307, 1308}
M316D, M318D and M322D Wheeled Excavators Machine Systems Boom - Install - Standard Boom
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System Electronic Control Module (ECM) - Replace
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Electronic Control Module (ECM) - Replace
314D CR Hydraulic Excavator Machine Systems Swing Motor - Install
323D MHPU Mobile Hydraulic Power Unit Machine System Specifications Fuel Tank