C4.2 and C6.4 Engines for Caterpillar Built Machines Caterpillar


Fuel Injection Timing - Check

Usage:

320D A6F



图 1g01811934

(1) 燃油喷油泵驱动齿轮

(2) 惰轮

(3) 凸轮轴齿轮

(4) 曲轴齿轮

  1. 将 1 号活塞设置在压缩冲程的上止点。 请参阅测试和调整, "确定 1 号活塞上止点位置"以了解正确的步骤。

  1. 将每个齿轮上的标记对准惰轮。 燃油喷油泵齿轮上的标记应跨越惰轮的所有轮齿。

Caterpillar Information System:

C4.2 and C6.4 Engines for Caterpillar Built Machines Cooling System
C4.2 and C6.4 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
325C MHPU Mobile Hydraulic Power Unit Hydraulic Tank Screen - Clean
325C MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Level - Check
325C MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Filter (Pilot) - Replace
M315D2 and M317D2 Excavators Automatic Lubrication Grease Tank - Fill - If Equipped
325C MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Filter (Case Drain) - Replace
330D Forest Machine Machine Systems Load Control Valve (Boom Cylinder) - Remove
568 Forest Machines Machine Systems Load Control Valve (Stick Cylinder) - Install
365C MHPU Mobile Hydraulic Power Unit Hydraulic System Accumulator (Pilot) - Test and Charge
325C MHPU Mobile Hydraulic Power Unit Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
325C MHPU Mobile Hydraulic Power Unit Hydraulic System Oil - Change
321D LCR Excavator Lifting Capacities
C4.2 and C6.4 Engines for Caterpillar Built Machines Fuel System - Prime
C4.2 and C6.4 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines Compression - Test
Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064} Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064}
2007/06/18 A New Idler Pulley Is Available for the Engine Pulley Group {1361}
2007/04/16 New Software for the Auxiliary Hydraulic Circuits Is Available {7610, 7620}
M313D, M315D, M316D, M318D and M322D Excavators and M318D MH and M322D MH Material Handlers Lifting Capacities - M316D Excavator with a Offset Boom (Heavy Lift Option)
C4.2 and C6.4 Engines for Caterpillar Built Machines Engine Oil Pressure - Test
C4.2 and C6.4 Engines for Caterpillar Built Machines Engine Oil Pump - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines Connecting Rod - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines Cylinder Head - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.