Final Drive Oil Sample - Obtain
Show/hide table
 | |
| Illustration 1 | g00538194 |
(1) Oil drain plug (2) Oil level plug | |
- Remove oil level plug (2) .
- Obtain a sample of the final drive oil through the hole for the oil level plug.
- Install oil level plug (2) .
Refer to Operation and Maintenance Manual, "S·O·S Oil Analysis" in this section for more information on obtaining a sample of the final drive oil.
Caterpillar Information System:
2000/04/01 New Turbocharger Compressor Cover is now Available {1052}
3114, 3116, and 3126 Engines Unit Injector - Adjust
325, 325B and 325L Excavators Refill Capacities
325, 325B and 325L Excavators S·O·S Oil Analysis
2000/09/11 170-9227 Shims Will Control Injector Sleeve Reaming {0700, 0703, 0706, 1000}
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>121-6882</B> Generator through <B>123-3185</B> Generator
120H and 135H Motor Graders Fire Prevention and Explosion Prevention
325, 325B and 325L Excavators Final Drive Ring Gear Removal
325, 325B and 325L Excavators Part Number Location
584 and 584HD Forwarders General Hazard Information
3034 Engine for Caterpillar Built Machines Crankshaft Gear - Remove and Install
3114, 3116, and 3126 Engines Fuel Timing Dimension - Adjust
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Selection Guide for Voltage Regulator (SR4B for 3500 Engines)
3114, 3116, and 3126 Engines Unit Injector Synchronization - Adjust
2000/04/01 Image Gallery CD-ROM Is Now Available For The Caterpillar HEUI HI300 And EUI Fuel Systems {1250}
2001/05/01 Image Gallery CD-ROM Is Now Available For The Caterpillar HEUI HI300 And EUI Fuel Systems {1250}
2000/05/01 Check The Fuel Injection Control Linkage For A Loose Rivet {1298}
2000/04/01 New Expansion Tank is now Available {1354}
TK711, TK721, TK722 and TK732 Track Feller Bunchers Crushing Prevention and Cutting Prevention
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>129-1502</B> Generator through <B>129-5034</B> Generator
3114, 3116, and 3126 Engines Gear Group (Front) - Time
3034 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-7208</B> Generator through <B>5N-7232</B> Generator
325, 325B and 325L Excavators Final Drive