Electronic Modular Control Panel II (EMCP II) Caterpillar


Component Location - For EUI Engines

Usage:

3508B 5KW



Illustration 1g00698186

Instrument Panel - Face Of Front Panel

(1) Generator Set Control (GSC)

(2) Alarm Module (optional)

(3) Custom Alarm Module (CAM) (optional).

(4) Pump Stop Switch (optional)

(5) Start Aid Switch (SAS) (optional)

(6) Pump Run Switch (optional)

(7) Speed Potentiometer (SP) or Governor Switch (GS)

(8) Emergency Stop Push Button (ESPB)

(9) Panel Light Switch (PLS)

(10) Voltage Adjust Rheostat (VAR)

(11) Engine Control Switch (ECS)

(12) Caterpillar Monitoring System Display (optional)

(13) Caterpillar Monitoring System Scroll Switch (optional)

(14) Caterpillar Monitoring System Clear/Mode Switch (optional)

(15) Caterpillar Monitoring System LH/RH Select Switch (optional) (not present on 3606E engines)




Illustration 2g00670152

Instrument Panel - Back of Front Panel

Top view with front panel open

(1) Generator Set Control (GSC)

(2) Alarm Module (optional)

(3) Custom Alarm Module (CAM) (optional).

(4) Pump Stop Switch (optional)

(5) Start Aid Switch (SAS) (optional)

(6) Pump Run Switch (optional)

(7) Speed Potentiometer (SP) or Governor Switch (GS)

(8) Emergency Stop Push Button (ESPB)

(9) Panel Light Switch (PLS)

(10) Voltage Adjust Rheostat (VAR)

(11) Engine Control Switch (ECS)

(12) Caterpillar Monitoring System Display (optional)

(13) Caterpillar Monitoring System Scroll Switch (optional)

(14) Caterpillar Monitoring System Clear/Mode Switch (optional)

(15) Caterpillar Monitoring System LH/RH Select Switch (optional) (not present on 3606E engines)




Illustration 3g00698189

Control Panel Interior - Sub-Panel

(14) Signal converter

(15) Ether hold in relay

(16) Ether pull in relay

(17) Air shut-off relay

(18) Custom relay

(19) Generator run relay

(20) AC transformer box




Illustration 4g00698195

Control Panel - Customer Connection Box

(21) Cylinder pyrometer

(22) Earth fault relay (optional)

(23) Arming relay.

(24) Heater contactor

(25) Battery charger

(26) Alternator/Bearing temperature relays

(27) Kilowatt relays

(28) General alarm relays

(29) Digital voltage regulator

(30) Potential transformer

Caterpillar Information System:

3408E and 3412E Engines for Caterpillar Built Machines Cooling System - Check - Overheating
Electronic Modular Control Panel II (EMCP II) General Information
3618 Engine Fuel System Secondary Filter - Replace
3126B Engine for Caterpillar Built Machines Flash Programming
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Main Stator and Voltage Sensing Lead Connections (All Except SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Generator Wiring Diagrams (SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options General Information (SR4B for 3500 Engines)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump - Inspect
2000/04/01 Low NO<SUB>X</SUB> Program Now has an Automatic Service Information Management System (SIMS) Entry for 3126B Truck Engines {1000, 1088}
G3500 Industrial Engines Electronic Service Tools
C-10, C-12, C-15 and C-16 Industrial Engines CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
3114, 3116, and 3126 Engines Basic Engine
3618 Engine Engine Performance
Electronic Modular Control Panel II (EMCP II) Component Location - For 3412C, 3508, 3512, And 3516 MUI Engines
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Design
3114, 3116, and 3126 Engines Electrical System
Electronic Modular Control Panel II (EMCP II) Component Location - For 3406E Engines
2000/04/01 43-02 "Ignition Key Switch Fault" (71) {1553}
Uninterruptible Power Supply (UPS) 250 Dry Contact - Configure
Uninterruptible Power Supply (UPS) 250 Installation
2000/06/01 Improved Pacbrake Operation can be Attained by Removal of Breather Bolt or by Rerouting Solenoid Wiring on Some C-15 and C-16 Truck Engines {1129}
2000/04/01 Correction To Parts Manual, SEBP2697-02 {1000}
3054 Engine Air Inlet and Exhaust System - Inspect
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Main Stator and Voltage Sensing Lead Connections (SR4B for 3500 Engines)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.