Electronic Modular Control Panel II (EMCP II) Caterpillar


Component Location - For 3412C, 3508, 3512, And 3516 MUI Engines

Usage:

3412C 4BZ



Illustration 1g00698186

Instrument Panel - Face Of Front Panel

(1) Generator Set Control (GSC)

(2) Alarm Module (optional)

(3) Custom Alarm Module (CAM) (optional).

(4) Pump Stop Switch (not used on 3500 gensets)

(5) Start Aid Switch (SAS) (optional)

(6) Pump Run Switch (not used on 3500 gensets)

(7) Speed Potentiometer (SP) or Governor Switch (GS) (optional)

(8) Emergency Stop Push Button (ESPB)

(9) Panel Light Switch (PLS)

(10) Voltage Adjust Rheostat (VAR)

(11) Engine Control Switch (ECS)

(12) Caterpillar Monitoring System Display

(13) Caterpillar Monitoring System Scroll Switch (optional)

(14) Caterpillar Monitoring System Clear/Mode Switch (optional)

(15) Caterpillar Monitoring System LH/RH Select Switch (optional) (not present on 3606E engines)




Illustration 2g00436138

Control Panel - Back Of Front Panel

(1) Generator Set Control (GSC)

(2) Alarm Module (optional)

(3) Custom Alarm Module (CAM) (optional).

(4) Pump Stop Switch (not used on 3500 gensets)

(5) Start Aid Switch (SAS) (optional)

(6) Pump Run Switch (not used on 3500 gensets)

(7) Speed Potentiometer (SP) or Governor Switch (GS) (optional)

(8) Emergency Stop Push Button (ESPB)

(9) Panel Light Switch (PLS)

(10) Voltage Adjust Rheostat (VAR)

(11) Engine Control Switch (ECS)

(12) Caterpillar Monitoring System Display

(13) Caterpillar Monitoring System Scroll Switch (optional)

(14) Caterpillar Monitoring System Clear/Mode Switch (optional)

(15) Caterpillar Monitoring System LH/RH Select Switch (optional) (not present on 3606E engines)




Illustration 3g00760121

Control Panel Interior - Sub-Panel For 3500 Gensets

(16) Ground fault relay transformer (optional) (located on rear of sub-panel)

(17) Earth fault relay (AC) (optional)

(18) Arming relay (AC relay)

(19) Heater contactor (optional)

(20) Battery charger (optional)

(21) Bearing temperature relays (optional)

(22) Alternator temperature relays (optional)

(23) Kilowatt relay (ATB)

(24) General alarm relay (DC) (optional)

(25) Digital voltage regulator

(26) Potential transformers




Illustration 4g00698254

Control Panel Interior - Sub-panel

(27) Electronic Governor (optional)

(28) Air Shutoff Relay (not used on 3412 gensets)

(29) Custom Alarm Relay

(30) Generator Run Relay

(31) AC transformer box




Illustration 5g00698257

Control Panel - Bottom View

(32) DC connector - from marshalling box

(33) AC connector - from generator.

(34) DC connector - from engine.

(35) DC connector - from engine.

(36) Not used on 3412 gensets.




Illustration 6g00763309

(37) Transformers (optional)

(38) 2301A Load Sharing and Speed Control Module (optional)

Caterpillar Information System:

3618 Engine Engine Performance
Electronic Modular Control Panel II (EMCP II) Component Location - For EUI Engines
3408E and 3412E Engines for Caterpillar Built Machines Cooling System - Check - Overheating
Electronic Modular Control Panel II (EMCP II) General Information
3618 Engine Fuel System Secondary Filter - Replace
3126B Engine for Caterpillar Built Machines Flash Programming
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Main Stator and Voltage Sensing Lead Connections (All Except SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Generator Wiring Diagrams (SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options General Information (SR4B for 3500 Engines)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump - Inspect
2000/04/01 Low NO<SUB>X</SUB> Program Now has an Automatic Service Information Management System (SIMS) Entry for 3126B Truck Engines {1000, 1088}
G3500 Industrial Engines Electronic Service Tools
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Design
3114, 3116, and 3126 Engines Electrical System
Electronic Modular Control Panel II (EMCP II) Component Location - For 3406E Engines
2000/04/01 43-02 "Ignition Key Switch Fault" (71) {1553}
Uninterruptible Power Supply (UPS) 250 Dry Contact - Configure
Uninterruptible Power Supply (UPS) 250 Installation
2000/06/01 Improved Pacbrake Operation can be Attained by Removal of Breather Bolt or by Rerouting Solenoid Wiring on Some C-15 and C-16 Truck Engines {1129}
2000/04/01 Correction To Parts Manual, SEBP2697-02 {1000}
3054 Engine Air Inlet and Exhaust System - Inspect
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Main Stator and Voltage Sensing Lead Connections (SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Oil Field Generator Connections (SR4)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options VR4 Voltage Regulator Connections (All Except SR4B for 3500 Engines)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.