System Schematic
The following schematic is available:
Reference: Schematic, RENR2475, "Uninterruptible Power Supply (UPS) 250".
Caterpillar Information System:
2000/03/01 Do Not Replace The Engine Control Module (ECM) Because A 84-02 Diagnostic Fault Code Has Occurred {1900, 1901}
3406C Truck Engine Fuel in Engine Oil
2000/03/01 Engine Control Module (ECM) Hotline Is Now Available {1901}
2000/04/01 Correction To Testing And Adjusting Section, "Spark Plug and Transformer" Information {1555, 1561}
3064 and 3066 Engines for Caterpillar Built Machines Cooling System - Check - Overheating
3406C Truck Engine Fuel in Cooling System
3406C Truck Engine Excessive White Smoke
3054 Engine Cooling System - Test
2000/03/01 The Torque Value Has Changed For High Temperature Locknut {7553}
G3516B Engines Engine Monitoring System
3064 and 3066 Engines for Caterpillar Built Machines Cooling System - Inspect
3612 and 3616 Engines Indicators for Engine Oil Pressure
3406C Truck Engine Fuel Ratio Control
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Timing - Check
3618 Engine Fuel System Operation
3618 Engine Fuel Injection Control Linkage
G3516B Engines Replacing the ECM
2000/05/01 New Heavy-Duty Water Pump Seal Assemblies Are Available for Service Replacement {1361}
3618 Engine Fuel Injector
3618 Engine Fuel Injection Cycle
3618 Engine Aftercooler
3618 Engine Compressor Bypass Group
3618 Engine Turbocharger
3618 Engine Valve System Components