Actuator Motor (Air Distributor) - Remove and Install
拆卸步骤
开始:
- 拆下储物箱和盖子。 请参阅拆解和组装, "储物箱和盖(驾驶室)- 拆卸和安装"。
注: 清洁度是一项重要的因素。 拆解步骤开始之前,应彻底清洁部件外部。 这有助于防止尘土进入内部结构。
- 拆下螺钉 (2) 和盖 (1) 。
Show/hide table
图 1 | g01187573 |
- 拆下螺钉 (4) 和执行器马达 (3) 。
Show/hide table
图 2 | g01187575 |
- 拆下螺钉 (5) 和执行器马达 (6) 。
- 卸下螺钉 (7) 。 对底部重复进行上述步骤。
Show/hide table
图 3 | g01187578 |
- 向前拉动滤清器盖组件 (8) 。
- 断开线束组件 (9) 。
Show/hide table
图 4 | g01187579 |
- 如图所示,将滤清器盖组件 (8) 放置在侧面。
Show/hide table
图 5 | g01187580 |
- 拆下螺钉 (10) 和执行器 (11) 。
安装步骤
- 安装执行器 (11) 和螺钉 (10) 。
Show/hide table
图 6 | g01187580 |
- 连接线束组件 (9) 。
Show/hide table
图 7 | g01187579 |
- 将滤清器盖组件 (8) 滑动就位后安装螺钉 (7) 。 对底部重复进行上述步骤。
Show/hide table
图 8 | g01187578 |
- 安装执行器马达 (3) 和螺钉 (4) 。
Show/hide table
图 9 | g01187575 |
- 安装执行器马达 (6) 和螺钉 (5) 。
- 安装盖 (1) 和螺钉 (2) 。
Show/hide table
图 10 | g01187573 |
End By: 安装储物箱和盖子。 请参阅 拆解和组装, "储物箱和盖(驾驶室)- 拆卸和安装"。
Caterpillar Information System:
C18 Generator Sets Cooling System Supplemental Coolant Additive (SCA) - Test/Add
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine - Install
303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System Accumulator (Pilot) - Test and Charge
302.5C Mini Hydraulic Excavator Hydraulic System Cylinder Drift - Check
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Visual Inspection
302.5C Mini Hydraulic Excavator Hydraulic System Cylinder Speed - Check
302.5C Mini Hydraulic Excavator Hydraulic System Travel on Level Ground - Test
302.5C Mini Hydraulic Excavator Hydraulic System Engine Performance - Test - Engine Speed
303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System General Testing and Adjusting Information
303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System Hydraulic System Pressure - Release
302.5C Mini Hydraulic Excavator Hydraulic System Swing Speed and Swing Drift on a Slope - Check
302.5C Mini Hydraulic Excavator Hydraulic System Machine Drift on a Slope - Check
390D Excavator Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Heater Core - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Heater Core - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Evaporator Coil - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Evaporator Coil - Install
390D Excavator Machine Systems Coolant Temperature Sensor - Remove and Install
390D Excavator Machine Systems Temperature Sensor (Cab Air) - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Pressure Switch (Refrigerant Pressure Cutoff) - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Control Module (Automatic Temperature Control Unit) - Remove and Install
390D Excavator Machine Systems Temperature Sensor (Evaporator Coil) - Remove and Install
365C Excavator Machine Systems Temperature Sensor (Ambient Air) - Remove and Install
365C Excavator Machine Systems Heating and Air Conditioning Unit - Remove