Evaporator Coil - Install
注: 清洁度是一项重要的因素。 组装之前,应使用清洗剂彻底清洁所有零件。 让零件风干。 不要使用抹布擦干零件。 棉绒可能会留在零件上,可能导致以后出现故障。 检查所有零件。 如果任何零件磨损或损坏,则应使用新零件进行更换。
- 安装蒸发器盘管 (7)。
- 安装温度传感器 (6)。
Show/hide table
图 2 g01187599 - 将壳体 (4) 连接到壳体 (5)。
Show/hide table
图 3 g01187598 - 安装螺栓 (3)。
Show/hide table
图 4 g01187597 - 连接线束组件 (1) 和 (2)。
Show/hide table
图 1 | g01187620 |
结束:
- 安装暖气和空调装置。 请参阅拆解和组装, "暖气和空调装置 - 安装"。
Caterpillar Information System:
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Evaporator Coil - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Heater Core - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Heater Core - Remove
390D Excavator Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
390D Excavator Machine Systems Actuator Motor (Air Distributor) - Remove and Install
C18 Generator Sets Cooling System Supplemental Coolant Additive (SCA) - Test/Add
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine - Install
303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System Accumulator (Pilot) - Test and Charge
302.5C Mini Hydraulic Excavator Hydraulic System Cylinder Drift - Check
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Visual Inspection
302.5C Mini Hydraulic Excavator Hydraulic System Cylinder Speed - Check
302.5C Mini Hydraulic Excavator Hydraulic System Travel on Level Ground - Test
390D Excavator Machine Systems Coolant Temperature Sensor - Remove and Install
390D Excavator Machine Systems Temperature Sensor (Cab Air) - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Pressure Switch (Refrigerant Pressure Cutoff) - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Control Module (Automatic Temperature Control Unit) - Remove and Install
390D Excavator Machine Systems Temperature Sensor (Evaporator Coil) - Remove and Install
365C Excavator Machine Systems Temperature Sensor (Ambient Air) - Remove and Install
365C Excavator Machine Systems Heating and Air Conditioning Unit - Remove
365C Excavator Machine Systems Heating and Air Conditioning Unit - Install
M318C and M322C Excavators Machine Systems Upper Frame and Undercarriage Frame - Separate
M318C and M322C Excavators Machine Systems Upper Frame and Undercarriage Frame - Connect
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Alternator - Remove and Install
C6.6 Engines for Caterpillar Built Machines Engine Oil Pressure