Control Module (Automatic Temperature Control Unit) - Remove and Install
注: 清洁度是一项重要的因素。 拆解步骤开始之前,应彻底清洁部件外部。 这有助于防止尘土进入内部结构。
- 断开线束组件 (1) 和 (2)。
Show/hide table
图 2 g01187646 - 拆下螺栓 (3)。
- 通过回拉面板 (4) 接近控制模块。
Show/hide table
图 3 g01187647 - 拆下控制模块 (5)。
Show/hide table
图 1 | g01187645 |
- 安装控制模块 (5)。
Show/hide table
图 5 g01187646 - 重新定位面板 (4) 后安装螺栓 (3)。
Show/hide table
图 6 g01187645 - 连接线束组件 (1) 和 (2)。
Show/hide table
图 4 | g01187647 |
Caterpillar Information System:
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Pressure Switch (Refrigerant Pressure Cutoff) - Remove and Install
390D Excavator Machine Systems Temperature Sensor (Cab Air) - Remove and Install
390D Excavator Machine Systems Coolant Temperature Sensor - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Evaporator Coil - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Evaporator Coil - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Heater Core - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Heater Core - Remove
390D Excavator Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
390D Excavator Machine Systems Actuator Motor (Air Distributor) - Remove and Install
C18 Generator Sets Cooling System Supplemental Coolant Additive (SCA) - Test/Add
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine - Install
303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System Accumulator (Pilot) - Test and Charge
390D Excavator Machine Systems Temperature Sensor (Evaporator Coil) - Remove and Install
365C Excavator Machine Systems Temperature Sensor (Ambient Air) - Remove and Install
365C Excavator Machine Systems Heating and Air Conditioning Unit - Remove
365C Excavator Machine Systems Heating and Air Conditioning Unit - Install
M318C and M322C Excavators Machine Systems Upper Frame and Undercarriage Frame - Separate
M318C and M322C Excavators Machine Systems Upper Frame and Undercarriage Frame - Connect
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Alternator - Remove and Install
C6.6 Engines for Caterpillar Built Machines Engine Oil Pressure
302.5C Mini Hydraulic Excavator Machine Systems Boom - Remove and Install
325C Excavator Engine Supplement Engine Oil Cooler - Remove and Install
325C Excavator Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
325C Excavator Engine Supplement Fan Drive - Disassemble