Heater Core - Install
注: 清洁度是一项重要的因素。 组装之前,应使用清洗剂彻底清洁所有零件。 让零件风干。 不要使用抹布擦干零件。 棉绒可能会留在零件上,可能导致以后出现故障。 检查所有零件。 如果任何零件磨损或损坏,则应使用新零件进行更换。
- 安装加热器芯 (16)。
- 重新安置操纵杆组件 (12) 和 (13)。
- 安装螺栓 (14) 和 (15)。
Show/hide table
图 3 g01187603 - 安置盖组件 (11) 并安装螺栓 (10)。
Show/hide table
图 4 g01187601 - 连接冷却液温度传感器 (9)。
Show/hide table
图 5 g01187600 - 安装卡箍 (6)、 (7) 和 (8)。
Show/hide table
图 6 g01187599 - 将壳体 (4) 连接到壳体 (5)。
Show/hide table
图 7 g01187598 - 安装螺栓 (3)。
Show/hide table
图 8 g01187597 - 连接线束组件 (1) 和 (2)。
Show/hide table
图 1 | g01187605 |
Show/hide table
图 2 | g01187604 |
结束:
- 安装暖气和空调装置。 请参阅拆解和组装, "暖气和空调装置 - 安装"。
Caterpillar Information System:
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Heater Core - Remove
390D Excavator Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
390D Excavator Machine Systems Actuator Motor (Air Distributor) - Remove and Install
C18 Generator Sets Cooling System Supplemental Coolant Additive (SCA) - Test/Add
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine - Install
303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System Accumulator (Pilot) - Test and Charge
302.5C Mini Hydraulic Excavator Hydraulic System Cylinder Drift - Check
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Visual Inspection
302.5C Mini Hydraulic Excavator Hydraulic System Cylinder Speed - Check
302.5C Mini Hydraulic Excavator Hydraulic System Travel on Level Ground - Test
302.5C Mini Hydraulic Excavator Hydraulic System Engine Performance - Test - Engine Speed
303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System General Testing and Adjusting Information
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Evaporator Coil - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Evaporator Coil - Install
390D Excavator Machine Systems Coolant Temperature Sensor - Remove and Install
390D Excavator Machine Systems Temperature Sensor (Cab Air) - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Pressure Switch (Refrigerant Pressure Cutoff) - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Control Module (Automatic Temperature Control Unit) - Remove and Install
390D Excavator Machine Systems Temperature Sensor (Evaporator Coil) - Remove and Install
365C Excavator Machine Systems Temperature Sensor (Ambient Air) - Remove and Install
365C Excavator Machine Systems Heating and Air Conditioning Unit - Remove
365C Excavator Machine Systems Heating and Air Conditioning Unit - Install
M318C and M322C Excavators Machine Systems Upper Frame and Undercarriage Frame - Separate
M318C and M322C Excavators Machine Systems Upper Frame and Undercarriage Frame - Connect