Swing Drive - Remove
Removal Procedure
Start By:
- Remove the swing motor. Refer to Disassembly and Assembly, "Swing Motor - Remove".
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Drain the hydraulic oil from swing drive (2) .
Show/hide table
 | |
| Illustration 1 | g01182417 |
- Remove bolts (1) and swing drive (2) .
Caterpillar Information System:
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Bucket Cylinder - Remove and Install
Installation of Replacement Switches for the Travel Alarm on Mini Hydraulic Excavators{7429} Installation of Replacement Switches for the Travel Alarm on Mini Hydraulic Excavators{7429}
303.5C CR and 303C CR Mini Hydraulic Excavators Hydraulic System Travel Counterbalance Valve
365C Excavator Engine Supplement Engine Oil Filter Base - Install
365C Excavator Engine Supplement Engine Oil Filter Base - Remove
C7.1 (Mech) Industrial Engine Gear Group (Front)
C7.1 (Mech) Industrial Engine Oil Pump
C9 Generator Set Engine Crankcase Breather - Clean
C7.1 Engines for Caterpillar Built Machines Front Housing and Covers
365C Excavator Engine Supplement Refrigerant Receiver-Dryer - Remove and Install
365C Excavator Engine Supplement Refrigerant Condenser - Remove and Install
365C Excavator Engine Supplement Refrigerant Compressor - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swing Drive - Install
365C Excavator Engine Supplement Water Temperature Regulator - Remove and Install
325C Excavator Engine Supplement Fan - Remove and Install
365C Excavator Engine Supplement Ether Start Valve - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Swing Boom Cylinder - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Travel Counterbalance Valve
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Bucket Linkage - Remove and Install
365C Excavator Engine Supplement Engine Electronic Control - Remove and Install
365C Excavator Engine Supplement Fuel Cooler - Remove and Install
365C Excavator Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
365C Excavator Engine Supplement Fuel Priming Pump - Remove and Install
365C Excavator Engine Supplement Fuel Transfer Pump - Remove and Install