C9 Generator Set Caterpillar


Engine Crankcase Breather - Clean

Usage:

C9 C9E


FIGYELMEZTETÉS

Ezt a műveletet csak leállított motor melett szabad végrehajtani.



FIGYELMEZTETÉS

Ha a forgattyúsház szellőzőjét nem tartják rendszeresen karban, eldugulhat. Az eldugult szellőző túlnyomást okoz a forgattyúsházban, ami a forgattyúsház tömítésének a szivárgását idézheti elő.




Illusztráció 1g01182276

(1) Csavar és alátét

(2) Szellőző

(3) Motorblokk

  1. Vegye ki a csavart és az alátétet. Vegye ki a szellőzőt és a tömítést.

  2. Mossa át a szellőzőt nem gyúlékony, tiszta oldószerben. Visszaszerelés előtt hagyja, hogy a szellőzőelem megszáradjon.

  3. Helyezzen be egy tiszta és száraz szellőzőt. Szerelje fel a szellőzőt és a tömítést.

  4. Helyezze be a csavart és az alátétet. A megfelelő nyomatékértékekre vonatkozóan lásd: Műszaki adatok, SENR3130, "Meghúzási nyomatékok".

Caterpillar Information System:

C7.1 Engines for Caterpillar Built Machines Front Housing and Covers
365C Excavator Engine Supplement Refrigerant Receiver-Dryer - Remove and Install
365C Excavator Engine Supplement Refrigerant Condenser - Remove and Install
365C Excavator Engine Supplement Refrigerant Compressor - Remove and Install
365C Excavator Engine Supplement Precleaner - Remove and Install
365C Excavator Engine Supplement Electric Starting Motor - Remove and Install
365C Excavator Engine Supplement Battery - Remove and Install
365C Excavator Engine Supplement Alternator - Remove and Install
365C Excavator Engine Supplement Air Cleaner - Remove and Install
C7.1 Engines for Caterpillar Built Machines Exhaust Manifold
C7.1 Engines for Caterpillar Built Machines Flywheel
C6.6 Engines for Caterpillar Built Machines Fuel Injection Lines
C7.1 (Mech) Industrial Engine Oil Pump
C7.1 (Mech) Industrial Engine Gear Group (Front)
365C Excavator Engine Supplement Engine Oil Filter Base - Remove
365C Excavator Engine Supplement Engine Oil Filter Base - Install
303.5C CR and 303C CR Mini Hydraulic Excavators Hydraulic System Travel Counterbalance Valve
Installation of Replacement Switches for the Travel Alarm on Mini Hydraulic Excavators{7429} Installation of Replacement Switches for the Travel Alarm on Mini Hydraulic Excavators{7429}
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Bucket Cylinder - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swing Drive - Remove
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swing Drive - Install
365C Excavator Engine Supplement Water Temperature Regulator - Remove and Install
325C Excavator Engine Supplement Fan - Remove and Install
365C Excavator Engine Supplement Ether Start Valve - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.