365C Excavator Engine Supplement Caterpillar


Engine Oil Filter Base - Remove

Usage:

365C ELC

拆卸步骤

注: 清洁度是一项重要的因素。 拆解步骤开始之前,应彻底清洁部件外部。 这有助于防止尘土进入内部结构。


注意

在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。

有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。

按照当地法规和指令处置所有液体。


注: 为便于安装,在所有管路、软管、导线和管子上做出识别标记。 插接好所有线路、软管和管路。 这将有助于防止液体泄漏和防止污染物进入系统。




    图 1g01187161

  1. 卸下挡板 (1) 。



    图 2g01185922

  1. 断开软管组件 (4) 和 (7) 。

  1. 拆下螺栓 (2) 、 (3) 和 (5) 。

  1. 拆下机油滤清器底座 (6) 。

Caterpillar Information System:

C7.1 (Mech) Industrial Engine Gear Group (Front)
C7.1 (Mech) Industrial Engine Oil Pump
C9 Generator Set Engine Crankcase Breather - Clean
C7.1 Engines for Caterpillar Built Machines Front Housing and Covers
365C Excavator Engine Supplement Refrigerant Receiver-Dryer - Remove and Install
365C Excavator Engine Supplement Refrigerant Condenser - Remove and Install
365C Excavator Engine Supplement Refrigerant Compressor - Remove and Install
365C Excavator Engine Supplement Precleaner - Remove and Install
365C Excavator Engine Supplement Electric Starting Motor - Remove and Install
365C Excavator Engine Supplement Battery - Remove and Install
365C Excavator Engine Supplement Alternator - Remove and Install
365C Excavator Engine Supplement Air Cleaner - Remove and Install
365C Excavator Engine Supplement Engine Oil Filter Base - Install
303.5C CR and 303C CR Mini Hydraulic Excavators Hydraulic System Travel Counterbalance Valve
Installation of Replacement Switches for the Travel Alarm on Mini Hydraulic Excavators{7429} Installation of Replacement Switches for the Travel Alarm on Mini Hydraulic Excavators{7429}
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Bucket Cylinder - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swing Drive - Remove
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swing Drive - Install
365C Excavator Engine Supplement Water Temperature Regulator - Remove and Install
325C Excavator Engine Supplement Fan - Remove and Install
365C Excavator Engine Supplement Ether Start Valve - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Swing Boom Cylinder - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Travel Counterbalance Valve
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Bucket Linkage - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.