Bucket Linkage - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-1859     | Retaining Ring Pliers     | 1     |
B     | 1U-7519     | Hydraulic Pump     | 1     |
6V-7047 | Single Acting Cylinder     | 1     | |
FT-3039 | Receiving Sleeve     | 1     | |
FT-3038 | Puller Plate     | 1     | |
5P-4776 | Tool Stud     | 1     | |
9U-6833 | Nut     | 1     |
Start By:
- Remove the bucket. Refer to Disassembly and Assembly, "Bucket - Remove and Install".
- Position the stick in a level position on suitable blocking and retract the bucket cylinder.
Show/hide table
Illustration 1 | g01182507 |
- Use Tooling (A) to remove retaining rings (3) .
- Remove link (2) and shims (1) .
- Remove pin assemblies (4), link (5), shims (6), and link assembly (7) .
Show/hide table
Illustration 2 | g01182506 |
- Use Tooling (B) to remove bearings (8) .
Show/hide table
Illustration 3 | g01182611 |
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-1859     | Retaining Ring Pliers     | 1     |
B     | 1U-7519     | Hydraulic Pump     | 1     |
6V-7047 | Single Acting Cylinder     | 1     | |
FT-3039 | Receiving Sleeve     | 1     | |
FT-3038 | Puller Plate     | 1     | |
5P-4776 | Tool Stud     | 1     | |
9U-6833 | Nut     | 1     |
- Lower the temperature of bearings (8). Use Tooling (B) to install bearings (8) .
Show/hide table
Illustration 4 | g01182620 |
- Position link assembly (7). Install shims (6), link (5), and pin assemblies (4) .
Show/hide table
Illustration 5 | g01182506 |
- Install shims (1) and link (2) .
Show/hide table
Illustration 6 | g01182507 |
- Use Tooling (A) to install retaining rings (3) .
End By: Install the bucket. Refer to Disassembly and Assembly, "Bucket - Remove and Install".
Caterpillar Information System:
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Travel Counterbalance Valve
302.5C Mini Hydraulic Excavator Machine Systems Swing Boom Cylinder - Remove and Install
365C Excavator Engine Supplement Ether Start Valve - Remove and Install
325C Excavator Engine Supplement Fan - Remove and Install
365C Excavator Engine Supplement Water Temperature Regulator - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swing Drive - Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swing Drive - Remove
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Bucket Cylinder - Remove and Install
Installation of Replacement Switches for the Travel Alarm on Mini Hydraulic Excavators{7429} Installation of Replacement Switches for the Travel Alarm on Mini Hydraulic Excavators{7429}
303.5C CR and 303C CR Mini Hydraulic Excavators Hydraulic System Travel Counterbalance Valve
365C Excavator Engine Supplement Engine Oil Filter Base - Install
365C Excavator Engine Supplement Engine Oil Filter Base - Remove
365C Excavator Engine Supplement Engine Electronic Control - Remove and Install
365C Excavator Engine Supplement Fuel Cooler - Remove and Install
365C Excavator Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
365C Excavator Engine Supplement Fuel Priming Pump - Remove and Install
365C Excavator Engine Supplement Fuel Transfer Pump - Remove and Install
C6.6 Engines for Caterpillar Built Machines Crankshaft
314E Excavator Machine System Specifications Check Valve (Return Lines)
2005/07/04 New Software Reduces the Trip Points on the Fuel Pressure Sensor {1718, 7620}
320D Excavator Specifications
2005/07/04 An Improved Idler Pulley Has Been Released {1358}
365C Excavator Engine Supplement Fuel Filter and Water Separator Base - Remove and Install - Primary
365C Excavator Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install