0224-11 Theft Deterrent Active (00)
产生此代码的情况:
防盗特性已经启用。 必须输入正确的密码才能关闭防盗。 然后就可以起动发动机了。
注: 此诊断代码表示一个事件。 此诊断代码不代表电子系统有故障。
如果输入了防盗密码，发动机控制模块 (ECM) 将运行在"安全怠速"模式下。 发动机必须运行才能在"安全怠速"模式下操作。 在再次输入防盗密码之前，ECM 将处于"安全怠速"模式。
系统响应:
仅出现激活诊断代码。 当防盗特性启用后，诊断代码将变为激活状态。
卡特彼勒电子技师 (ET) 不会显示状态。 检查发动机指示灯点亮。
在输入正确的密码之前发动机无法起动。 如果"安全怠速"模式启动，发动机将被限制到低怠速。
此诊断代码表示防盗特性已经启用。 没有电子系统故障。
测试步骤 1.
不需要故障诊断与排除。
结果:
- 正常 - 停止
Caterpillar Information System:
3612 and 3616 Engines Engine Oil Pump
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines PTO Engine RPM Set Speed (Input A and Input B) Circuit - Test
320B, 320B L, 320B LN, 322B L and 322B LN Excavators Supplement Bucket Linkage - Lubricate
2000/03/20 New 12 Volt AM/FM Radios Are Available {7338}
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Service Brake Pedal Position (Switch 2) Circuit - Test
3612 and 3616 Engines Lubrication System Operation
Uninterruptible Power Supply (UPS) 250 System Description
3408E and 3412E Engines for Caterpillar Built Machines Water Pump - Test
3612 and 3616 Engines Piston Cooling Jets
3500B High Displacement Locomotive Engines Air Inlet and Exhaust Lines
P16, P20, P25, P28, P40 and P60 Pulverizers Rotary Manifold - Assemble
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Starting Aid Switch Circuit - Test
3126B and 3126E On-highway Engines 0224-14 Theft Deterrent Active with Engine Cranking (00)
3612 and 3616 Engines Cooling System Operation
349F and 352F Excavators Stopping the Machine
3612 and 3616 Engines Combined Circuit Cooling System
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
2000/04/01 New Connecting Rod Bearing Provides Improved Service Life {1219}
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Connecting Rod Bearings - Install
723PLUS Digital Speed Control Conclusion of Initial Adjustment Procedures
3612 and 3616 Engines Separate Circuit Cooling System
723PLUS Digital Speed Control Speed Control Operation
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Crankshaft - Install