2000/02/01 Caterpillar


Correction to Guideline for Reusable Parts and Salvage Operations, SEBF8277-00 {1201}

Usage:

3126B 3GS
Industrial Engines:
3126 (S/N: 3TR1-UP)
Marine Engines:
3126B (S/N: 9ZF1-UP)
3126B (S/N: 3GS1-UP)
Guideline for Reusable Parts and Salvage Operations, SEBF8277-00, "Specifications and Salvage for Cylinder Blocks on 3126 Engines", Page 6, "Chart B - Locations and Dimensions on Front Face of Cylinder Block". This module is found in Service Manual, SEBF8000, "Guideline For Reusable Parts" and Service Manual, SEBF8211, "3116/3126 Engine Reuse and Salvage Manual".

Callout (C) is the dimension from the centerline of crankshaft bore to the top of block. This dimension should be 322.00 ± 0.17 mm (12.6771 ± 0.007 inch).

Caterpillar Information System:

3126B Engines Increased Engine Oil Temperature - Inspect
3126B Engines Excessive Engine Oil Consumption - Inspect
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor
3408E and 3412E Engines for Caterpillar Built Machines Fuel System - Prime
2000/02/01 C-10 and C-12 Low Oil Pressure Warnings {1924}
Procedure For Replacing The Software For The Timing Control Module{1901} Procedure For Replacing The Software For The Timing Control Module{1901}
The Installation of an ADEM 2000 on C-10, C-12, 3406E, C-15, or C-16 Truck Engines into a 1998 and Earlier Model ADEM ll on C-10, C-12, or 3406E Chassis{1000, 1408, 1901, 1920} The Installation of an ADEM 2000 on C-10, C-12, 3406E, C-15, or C-16 Truck Engines into a 1998 and Earlier Model ADEM ll on C-10, C-12, or 3406E Chassis{1000, 1408, 1901, 1920}
3408E and 3412E Engines for Caterpillar Built Machines Fuel System - Inspect
3412E and C30 Marine Engines Overhaul (Top End)
3126B Engines Engine Valve Lash - Inspect/Adjust
3524B Engines for 797 and 797B Off-Highway Trucks Fuel Injector Adjustment
3126B Engines Engine Crankcase Pressure (Blowby) - Test
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader E017 High Engine Coolant Temperature Warning
3126B Engines Cooling System - Test
3408E and 3412E Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
3500B Engines Fuel Ratio Control
3500B and 3500B High Displacement Generator Set Engines Checking Engine Cylinders
3126B and 3126E Truck Engine Cooling System - Check - Overheating
3512B Marine Auxiliary Engine Fuel Injector Adjustment
3126 Truck Engine (Military) Water Temperature Regulator - Test
2000/02/01 A New Injector Hydraulic Pump Lines Group Is Now Used In The HEUI Fuel System {1307, 1714}
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger - Inspect
3408E and 3412E Engines for Caterpillar Built Machines Inlet Manifold Pressure - Test
3126B and 3126E Truck Engine Water Pump - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.