Camshaft Gear - Remove and Install
Removal Procedure
Start By:
- Remove the camshaft.
- Wrap the camshaft with a protective covering in order to prevent damage to the camshaft.
- Place camshaft (3) and drive gear (1) in a suitable press. Press camshaft (3) from drive gear (1) .
Show/hide table
Illustration 1 | g00522082 |
Show/hide table
NOTICE |
---|
Do not allow the camshaft to fall to the floor when pressing it from the drive gear. Also make sure that the camshaft lobes do not catch on the press plates. |
- Remove woodruff key (2) from camshaft (3) .
Installation Procedure
- Install woodruff key (2) in camshaft (3) .
Show/hide table
Illustration 2 | g00522082 |
- Heat drive gear (1) to a temperature of 300 °C (572 °F) for 30 minutes.
- Install drive gear (1) on the end of camshaft (3) .
- Ensure that woodruff key (2) is aligned. Also ensure that drive gear (1) makes contact with the shoulder on the end of camshaft (3) .
End By: Install the camshaft.
Caterpillar Information System:
2000/01/01 The New Bendix DuraFlo 596 Air Compressor Has Reduced Maintenance Costs {1803}
Customer Communication Module (CCM) for Diesel Engines RS-232C Cable Requirements
2000/01/01 A Socket Setscrew (Orifice) Is Used In The Oil Rail Of The Hydraulic Electronic Unit Injector (HEUI) Fuel System {1100}
3176C and 3196 Marine Engines Camshaft Bearings - Install
2000/04/01 A New Flexible High Pressure Oil Supply Hose Assembly Is Used In The Hydraulic Electronic Unit Injector (HEUI) Fuel System {1307, 1714}
Electronic Modular Control Panel II+ (EMCP II+) Data Link
3500B High Displacement Engines Low Coolant Temperature
3500B High Displacement Engines High Coolant Temperature
3176C and 3196 Marine Engines Camshaft Bearings - Remove
3500B High Displacement Engines Engine Oil Pressure
3176C and 3196 Marine Engines Camshaft - Install
G3304 and G3306 Engines Governor - Adjust
3500B Engines Electronic Control Module (ECM)
3512B Petroleum Engines Air Filter Restriction
3176C and 3196 Marine Engines Connecting Rod Bearings - Remove
3500B High Displacement Engines Engine Overspeed Control
3176C and 3196 Marine Engines Connecting Rod Bearings - Install
3500B High Displacement Engines Altitude Derate Feature
2000/03/01 New Software for the 3196 Marine Engines {7620}
Alternator - Delco 21SI Normal Operation
3176C and 3196 Marine Engines Fuel Priming Pump - Remove and Install
3500B High Displacement Locomotive Engines Exhaust Manifold
3500B High Displacement Engines Pressure Sensor for Turbocharger Compressor Outlet
2000/02/01 New Alternator Mounting Bracket Now Used {1405}