Air Inlet and Exhaust Lines
Show/hide table
Illustration 1 | g00281371 |
3512B Right Side View (Typical Example) |
Show/hide table
Illustration 2 | g00280590 |
Bolt Tightening Sequence (3512B) |
(1) Apply 4C-5597 Anti-Seize Compound to the threads and tighten the plug to the following torque. ...
(2) Tighten the bolts for the aftercooler according to the following procedure.
- Assemble seals to the aftercooler core.
- Temporarily secure the bottom seal with tape. Do not use an adhesive, a silicone lubricant, or any other lubricant for retention of the seal.
- Assemble the aftercooler with the seals to the inlet manifold.
- Inspect the bottom seal in order to ensure correct seating in the recess.
- Install the aftercooler cover.
- Inspect the upper seal in order to ensure correct seating in the recess.
- Install the cover bolts and hand tighten the bolts.
- Tighten the bolts according to the numerical sequence to the following torque.
Torque for bolts ...
24 N·m (18 lb ft) - Tighten the bolts again according to the numerical sequence to the following torque.
Torque for bolts ...
47 N·m (35 lb ft) - Remove the tape.
Caterpillar Information System:
G3500 Industrial Engines E4
G3500 Industrial Engines E6
G3500 Industrial Engines E2
G3500 Industrial Engines E1
G3500 Industrial Engines E0
365B Excavators Hydraulic System Machine Drift on a Slope - Check
2000/01/10 Download Flash Files By Using The Caterpillar Service Information System (SIS) Or SIS Web {1901, 7620}
1999/12/01 Smoke Emissions from On-Highway Diesel Engines and Roadside Testing {1000, 1088}
C32 Petroleum Generator Sets Engine Rating Definitions
3512B Petroleum Engines Cooling System Operation
3512B Petroleum Engines Turbocharger
3512B Petroleum Engines Aftercooler
G3500 Industrial Engines DDT Menu Map
1999/12/01 Low NO<SUB>X</SUB> Engine Rebuild Information is Available Electronically {1000, 1088}
3406E and 3456 Industrial Engines Fuel System Primary Filter - Clean/Replace
G3500 Industrial Engines Programming the TCM - Programming a New TCM
3176C Industrial Engine Fan Drive - Disassemble
3176C Industrial Engine Fan Drive - Assemble
G3500B Engines General Information (Electronic Control System)
2000/02/01 Reporting Incidents ThroughThe Cat Neutral Net {0353, 0373}
G3500B Engines Manifold Air Pressure Sensor
G3500B Engines Detonation Sensor
G3500B Engines Engine Speed/Timing Sensor
G3500B Engines Measuring Inlet Manifold Temperature