E0
Conditions Which Generate This Code:
An internal fault has been detected in the DDT.
System Response:
The engine will continue to operate. The DDT cannot communicate status and/or diagnostic information.
The DDT requires service.
Test Step 1.
Refer to Special Instruction, SEHS8806, "Using the DDT NEXG4511 Industrial Application Functions Service Program Module".
Results:
- OK - Stop.
Caterpillar Information System:
365B Excavators Hydraulic System Machine Drift on a Slope - Check
2000/01/10 Download Flash Files By Using The Caterpillar Service Information System (SIS) Or SIS Web {1901, 7620}
1999/12/01 Smoke Emissions from On-Highway Diesel Engines and Roadside Testing {1000, 1088}
C32 Petroleum Generator Sets Engine Rating Definitions
3512B Petroleum Engines Cooling System Operation
3512B Petroleum Engines Turbocharger
3512B Petroleum Engines Aftercooler
3612 and 3616 Engines Governor Drive - Remove - Earlier
3512B Petroleum Engines Air Inlet and Exhaust System Operation
3176C and 3196 Industrial Engines Rocker Shaft - Assemble
3512B Petroleum Engines Electronic Fuel Injector
3512B Petroleum Engines Fuel Injector Mechanism
G3500 Industrial Engines E1
G3500 Industrial Engines E2
G3500 Industrial Engines E6
G3500 Industrial Engines E4
3512B Oil Well Servicing Engines Air Inlet and Exhaust Lines
G3500 Industrial Engines DDT Menu Map
1999/12/01 Low NO<SUB>X</SUB> Engine Rebuild Information is Available Electronically {1000, 1088}
3406E and 3456 Industrial Engines Fuel System Primary Filter - Clean/Replace
G3500 Industrial Engines Programming the TCM - Programming a New TCM
3176C Industrial Engine Fan Drive - Disassemble
3176C Industrial Engine Fan Drive - Assemble
G3500B Engines General Information (Electronic Control System)