Rocker Shaft - Assemble
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Lubricate all components of the rocker shaft with clean engine oil.
Show/hide table
Illustration 1 g00665676 - Install valve rocker arms (1) and (3) with unit injector rocker arm (2) in stand (4).
- Align the bolt holes of the rocker shaft with the bolt holes in the stand. Then slide rocker shaft (5) into the stand.
End By:
- Install the rocker shaft. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Caterpillar Information System:
3512B Petroleum Engines Electronic Fuel Injector
3512B Petroleum Engines Fuel Injector Mechanism
3512B Petroleum Engines General Information (Fuel System)
G3500B Engines Exhaust Manifold
Cat Gas Engine Lubricant, Fuel, and Coolant Recommendations Oil Change Interval - and Oil Sampling
G3500B Engines Camshaft
G3500B Engines Crankshaft - 16 Cylinders
G3500 Engines Valve System Components
G3500 Engines Exhaust Bypass Valve
3512 Industrial Engine Turbocharger
G3500B Engines Aftercooler
2000/02/01 Reporting Incidents Through The Cat Neutral Net {0353, 0373}
3512B Petroleum Engines Air Inlet and Exhaust System Operation
3612 and 3616 Engines Governor Drive - Remove - Earlier
3512B Petroleum Engines Aftercooler
3512B Petroleum Engines Turbocharger
3512B Petroleum Engines Cooling System Operation
C32 Petroleum Generator Sets Engine Rating Definitions
1999/12/01 Smoke Emissions from On-Highway Diesel Engines and Roadside Testing {1000, 1088}
2000/01/10 Download Flash Files By Using The Caterpillar Service Information System (SIS) Or SIS Web {1901, 7620}
365B Excavators Hydraulic System Machine Drift on a Slope - Check
G3500 Industrial Engines E0
G3500 Industrial Engines E1
G3500 Industrial Engines E2